Panasonic PT-EX620 Operating Instructions - Page 45
Switching on/off the projector, Connecting the power cord, Power indicator
![]() |
View all Panasonic PT-EX620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 3 Basic Operations - Switching on/off the projector Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the switch is on the side before connecting the power cord. Use the power cord matching with the power supply voltage and the shape of the outlet. For details of power cord handling, refer to "Read this first!" (x page 4). Attaching the power cord 1) Check the shapes of the terminal on the rear of the projector body and the power cord connector, and insert the plug completely in the correct direction (until you hear the side tabs click in place). Removing the power cord 1) Confirm that the switch on the rear of the projector body is on the side, and remove the power plug from the outlet. 2) Remove the power cord connector from the terminal of the projector body while pressing the side tabs. Power indicator Displays the status of the power. Check the status of the power indicator before operating the projector. Power indicator Indicator status Off Lit Red Blinking*1 Projector status The main power is switched off. The power is switched off (Standby mode). The [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO]. Projection will start when the power button is pressed. The power is switched off (Standby mode). The [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NORMAL]. Projection will start when the power button is pressed. ff The projector may not operate when the lamp indicator or the temperature indicator is blinking. (x page 137) ENGLISH - 45
![](/manual_guide/products/panasonic-ptew550u-operating-instructions-2d0cff7/45.png)