Panasonic PT-EX620 Operating Instructions - Page 125
ENGLISH - 125, Click [Change] button.
View all Panasonic PT-EX620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 5 Operation of Function - Web control function 2) Select the item which you want to change the setting, then click [Next]. ffThe current setting is displayed. 3) Click [Change] button. ffThe setting change screen is displayed. Wired LAN 1 2 3 4 5 6 7 8 1 [PROJECTOR NAME] Enters the name of the projector. Enter the host name if it is required when using a DHCP server etc. 2 [DHCP ON], [DHCP OFF] Enables the DHCP client function, set to [DHCP ON]. 3 [IP ADDRESS] Enters the IP address when not using a DHCP server. 4 [SUBNET MASK] Enters the subnet mask when not using a DHCP server. 5 [DEFAULT GATEWAY] Enters the default gateway address when not using a DHCP server. 6 [DNS1] Enters the DNS1 server address. Permissible characters for the entry of DNS1 server address. (preferred): Numbers (0 - 9), period (.) (Example: 192.168.0.253) 7 [DNS2] Enters the DNS2 server address. Permissible characters for the entry of DNS2 server address. (alternate): Numbers (0 - 9), period (.) (Example: 192.168.0.254) 8 [Back], [Next] Click the [Back] button to return to the original screen. The current settings are displayed by pressing the [Next] button. Click the [Submit] button to update the settings. Note ff When you use the "Forward" and "Back" functions of your browser, a warning message "Page has Expired" may appear. In that case, click [Network config] again since the following operation will not be guaranteed. ff Changing LAN settings while connected to the LAN may cause the connection to cut out. ENGLISH - 125