Panasonic PT-EX620 Operating Instructions - Page 101
English - 101
![]() |
View all Panasonic PT-EX620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Chapter 4 Settings - [PROJECTOR SETUP] menu 3) Press as to select [PROGRAM EDIT]. 4) Press qw to select a program number, and press the button. 5) Press as to select a command number, and press the button. 6) Press asqw to select [TIME], and press the button. ffThe projector is in the adjustment mode (where the time is blinking). 7) Press qw to select "hour" or "minute", and press as to set a time, and then press the button. 8) Press asqw to select [COMMAND]. 9) Press the button. ffThe [COMMAND] detailed screen is displayed. 10) Press as to select a [COMMAND]. ffFor [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw. ffWhen [INPUT] is selected, press the button, and then press as to select the input to be set. [COMMAND] [POWER ON] [STANDBY] [SHUTTER] *1 [AV MUTE] *2 [INPUT] [LAMP POWER] [IN STANDBY MODE] [VOLUME] Detailed settings of [COMMAND] ― ― [OPEN] [CLOSE] [OFF] [ON] [NETWORK] [RGB1] [RGB2] [HDMI1] [HDMI2] [VIDEO] [DIGITAL LINK]*1 [INPUT1] - [INPUT10]*3 [NORMAL] [ECO] [OFF] [ON] [0] ~ [63] Description Switches on the projector. Enters standby. Disables the shutter function (shutter: open). Enables the shutter function (shutter: closed). Cancels the AV mute. The image and the audio disappear. Switches the input to NETWORK. Switches the input to RGB1. Switches the input to RGB2. Switches the input to HDMI1. Switches the input to HDMI2. Switches the input to VIDEO. Switches the input to DIGITAL LINK. Switches the input to DIGITAL LINK, and switch the input of the Panasonic twisted-pair-cable transmitter to the specified input. Sets the lamp brightness to high luminance. Sets the lamp brightness to low luminance. Audio output is stopped during standby. Audio is output during standby. Sets the volume. *1 For PT-EZ590, PT-EW650 and PT-EX620 *2 For PT-EW550 and PT-EX520 *3 When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the projector, its input name is automatically reflected from [INPUT1] to [INPUT10]. If an item where the input name is not reflected is selected, it is disabled. 11) Press the button. ffThe command is fixed and n is displayed at the left of the selected command. 12) Press asqw to select [STORE], and press the button. Note ff If you attempt to register the setting that would make the lamp turn on for a short time, an error message will be displayed on the screen. Set the time and the command again. ff To delete a command that has been already set, press the button on the remote control while the screen in Step 5) is displayed, or select [DELETE] at the screen in Step 6) and press the button. ff If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command number. ff The operating time will be the local time. (x page 102) ff If an operation is executed with the remote control or the control panel of the projector or with a control command before the command set in [SCHEDULE] is executed, the command set with the schedule function may not be executed. ENGLISH - 101
![](/manual_guide/products/panasonic-ptew550u-operating-instructions-2d0cff7/101.png)