Panasonic PT-EW550 PT-EZ590 Series Operating Instructions
Panasonic PT-EW550 Manual
 |
View all Panasonic PT-EW550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PT-EW550 manual content summary:
- Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 1
Operating Instructions Functional Manual LCD Projector Commercial Use Model No. PT-EZ590 PT-EW650 PT-EW550 PT-EX620 PT-EX520 Thank you for purchasing this Panasonic product. ■■ This manual is intended for products manufactured from Aug. 2018 and beyond. ■■ This manual is common to all the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 2
70 [DIGITAL CINEMA REALITY 70 [NOISE REDUCTION 70 [TV-SYSTEM 71 [RGB/YPBPR]/[RGB/YCBCR 71 [POSITION] menu 72 [REALTIME KEYSTONE 72 [SCREEN ADJUSTMENT] (For PT-EZ590 72 2 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 3
PT-EW650, PTEW550, PT-EX620 and PT [INITIALIZE ALL 104 [SERVICE PASSWORD 104 [SECURITY] Lamp/temperature/filter indicators 137 When an indicator lights up 137 Maintenance/replacement 139 Before performing maintenance/replacement..... 139 Maintenance 139 Replacing the unit 142 Troubleshooting - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 4
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TURN THE OUTLET BEFORE REPLACING THE LAMP UNIT. CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 5
USA only: ff This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated in your community due to considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149. For - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 6
PT-EZ590 / PT-EZ590L / PT-EW650 / PT-EW650L / PT-EW550 / PT-EW550L / PT-EX620 / PT-EX620L / PT-EX520 / PT-EX520L Panasonic Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com/support https://panasonic with the instruction manual, may cause - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 7
you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorised Service Center. If the fitted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 8
Read this first! To remove the battery Remote Control Battery 1. Press the guide and lift the cover. iii)i) i)i) 2. Remove the batteries. Brazil Only Brasil Apenas rr Manuseio de baterias usadas BRASIL Após o uso, as pilhas e/ou baterias deverão - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 9
near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued objects on top of it or wrap it into a bundle. Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary. - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 10
ff For any inspection, adjustment and repair work, please contact an Authorized Service Center. Do not project an image with the lens cover attached. Doing be paid to children. Use the ceiling mount bracket specified by Panasonic. Using the ceiling mount bracket other than the specified one will - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 11
power plug from the wall outlet. Electric shocks or explosions can result if this is not done. ff When replacing the lamp unit, turn the power off and allow the lamp to cool for at least one hour before handling it otherwise it can cause burns. Do not use the supplied power - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 12
> terminal. Excessive sound pressure from earphones and headphones can cause hearing loss. rr ACCESSORIES Do not use the old lamp unit. If used it could cause lamp explosion. If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the broken pieces. Failure - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 13
Read this first! CAUTION: When not using the projector for an extended period of time, remove the batteries from the remote control. Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire or contamination of surrounding area. rr - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 14
[email protected] rrIllustrations in this manual ffIllustrations of the projector PT-EZ590 in this manual, other models have their own characteristics and may be different from them. rrReference pages ffReference pages in this manual are indicated as (x page 00). rrTerm ffIn this manual - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 15
achieved by means of a unique optical system and lamp drive system. *1 PT-EX620 is 6 200 lm, PT-EW650 is 5 800 lm, PT-EZ590 is 5 400 lm, PT-EX520 is 5 300 lm and PT-EW550 is 5 000 lm. *2 PT-EZ590, PT-EW650 and PT-EX620 are 10 000:1, PT-EW550 and PT-EX520 are 2 000:1. Easy and highly flexible setup - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 16
Chapter 1 Preparation This chapter describes things you need to know or check before using the projector. 16 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 17
sharp temperature fluctuations such as near lights (studio lamps): Doing so may shorten the life of the lamp, or result in deformation of the outer case the cable wiring for DIGITAL LINK connection. (Only for PT-EZ590, PT-EW650 and PT-EX620) Image and sound may be disrupted if cable transmission - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 18
for use rrThe projector may not work properly due to strong radio waves from the broadcast station or the radio. (Only for PT-EZ590, PT-EW650 and PT-EX620) If there is any facility or equipment, which outputs strong radio waves, near the installation location, install the projector at a location - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 19
for PT‑EZ590, PT‑EW650 and PT‑EX620) "DIGITAL LINK" is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted pair cable by adding unique functions by Panasonic to the HDBaseTTM communication standard formulated by HDBaseT Alliance. This projector supports - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 20
Chapter 1 Preparation - Precautions for use Notes on Using Wireless Connection Wireless connection function of the projector uses radio waves in the 2.4 GHz band. A radio station license is not required, but be sure to read and fully understand the following items before use. The wireless module ( - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 21
problems, before using any wireless LAN devices, be absolutely sure to make all security-related settings according to the instructions given in the operation manuals Panasonic Professional Display and Projector Technical Support Website Refer to Panasonic website (https://panasonic indoor lamps from - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 22
of the projector is a high-pressure mercury lamp. A high-pressure mercury lamp has the following characteristics. ffThe luminance of the lamp will decrease by duration of usage. ffThe lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or degradation - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 23
unit Lens cover ʢ(NN22QQAAYYAʢA0N000201Q01A191YʣA9)00011ʢ9ʣN2QA(NYAʢ20QN0A021YQ2AA1Y0ʣA0000102112)1ʣ (Only models with lens) For PT-EZFFa5ono9rdr0PP/PT/PTT-EP-T-EEZ-TEZ-5XEW956X0962605/02,0/P0PPT-TTE--EWEXW66526F005or0PTFa-EnoWdrFPPo5Tr5T0-P-EET/W-XPET55W-25E500X5502/0PT-EX5(2T0XFKK01XMQZ - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 24
Instruction/list (PDF) Operating Instructions Multi Monitoring & Control Software Operating Instructions Logo Transfer Software Operating Instructions Presenter Light Software Operating Instructions ET‑PKE300B (Projector Mount Bracket) Replacement Lamp Unit Replacement Filter Unit ET-LAEF100 ET - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 25
used operation as a shortcut button. (x page 59) 13 button/ button ( button is for PT‑EZ590, PT‑EW650 and PT‑EX620. button is for PT‑EW550 and PT‑EX520.) Used when temporarily turning off the image and the audio. (x page 55) 14 button Displays - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 26
. 1 Remote control signal receiver (front) 2 Power indicator Displays the status of the power. 3 Lamp indicator Displays the status of the lamp. 4 Temperature indicator Displays the status of the internal temperature. 26 - ENGLISH 10 5 Filter indicator - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 27
of the image is automatically corrected. (x page 70) 22 Lamp cover The lamp unit is inside. Attention ff Do not block the ventilation ports > button ( button is for PT‑EZ590, PT‑EW650 and PT‑EX620. button is for PT‑EW550 and PT‑EX520.) Used when temporarily turning off the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 28
to input HDMI signals. 6 terminal This is the LAN terminal to connect to the network. 7 terminal (Only for PT-EZ590, PT-EW650 and PT-EX620) This is the LAN terminal to connect to the network. This is also used when connecting a video signal transmission device via the LAN - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 29
Chapter 1 Preparation - Preparing the remote control Preparing the remote control Inserting and removing the batteries ii) i) Fig. 1 Fig. 2 1) Open the cover. (Fig. 1) 2) Insert the batteries and close the cover (insert the m side first). (Fig. 2) ff When removing the batteries, perform the steps - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 30
Chapter 2 Getting Started This chapter describes things you need to do before using the projector such as the setup and connections. 30 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 31
(for Low Ceilings)) and ET‑PKE300B (Projector Mount Bracket). ffBe sure to use the Ceiling Mount Bracket specified for this projector. ffRefer to the Installation Instructions supplied with the Ceiling Mount Bracket when installing the projector with the bracket. ENGLISH - 31 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 32
Chapter 2 Getting Started - Setting up Attention ff To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualified technician. Projected image and throw distance Refer to the screen size and projection distances to install - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 33
3.9 ±20 ±15 0.7 1.4 ±20 ±15 0.4 0.8 Only [CURVED CORRECTION] used Min. value of R2/L2 Min. value of R3/L3 0.7 1.6 1.2 3.0 0.9 2.3 0.4 0.8 0.2 0.4 For PT-EW650 and PT-EW550 Only [KEYSTONE] used Projection Lens Model No. Standard zoom lens ET-ELW31 ET-ELW30 ET-ELT30 ET-ELT31 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 34
Chapter 2 Getting Started - Setting up For PT-EX620 and PT-EX520 Only [KEYSTONE] used Projection Lens Model No. Standard used, distance is corrected to become smaller than the specified screen size. For PT‑EZ590, PT-EW650, PT-EW550 rrWhen the image aspect ratio is 16:10 (Unit: m) Lens type - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 35
Chapter 2 Getting Started - Setting up rrWhen the image aspect ratio is 16:9 (Unit: m) Lens type Projection Lens Model No. Throw ratio*1 Projected image size Diagonal (SD) Height Width (SH) (SW) 1.02 (40") 0.498 0.886 1.27 (50") 0.622 1.107 1.52 (60") 0.745 1.325 1.78 (70") 0.872 1.552 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 36
Chapter 2 Getting Started - Setting up For PT‑EX620 and PT‑EX520 rrWhen the image aspect ratio is 4:3 (Unit: calculate projection distance per projection lens To use a screen size not listed in this manual, check the screen size SD (m) and use the respective formula to calculate projection - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 37
0.1364 L = 3.3622 x SD + 0.1001 L = 6.1287 x SD + 0.0940 L = 3.4557 x SD + 0.1001 L = 6.2991 x SD + 0.0940 L = 3.8063 x SD + 0.1001 L = 6.9382 x SD + 0.0940 For PT‑EX620 and PT‑EX520 Lens type Projection Lens Model No. Standard zoom lens - Short focus zoom lens ET‑ELW31 Short focus zoom lens - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 38
opposite direction. Maximum adjustable range Adjustable feet: 23 mm (29/32") each Attention ff Heated air is expelled from the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when adjusting the adjustable feet. (x page 26) 38 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 39
fixing screw". (x page 40) Attaching the projection lens Attach the projection lens with the following procedure. Guide groove Red marks Projection lens guide Guide groove Projection lens guide Fig.1 Projection lens Fig.2 1) Align the red mark on the projection lens with the red mark on - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 40
Chapter 2 Getting Started - Removing/attaching the projection lens When attaching the lens release button fixing screw Attach the lens antitheft screw with the following procedures. Lens release button fixing screw Lens release button fixing screw hole 1) Place the projector upside down on a soft - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 41
Connecting Chapter 2 Getting Started - Connecting Before connecting ffBefore connecting, carefully read the operating instructions for the external device to be connected. ffTurn off the power of all devices before connecting cables. ffTake note of the following points before connecting - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 42
terminal by using an HDMI/DVI conversion cable, but some devices may not project the image properly or function properly. ff The projector does not support VIERA Link (HDMI). ff If the [AUDIO IN SELECT] settings are incorrect, the projector may have malfunctions such as the absence of audio. ff When - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 43
the absence of audio. Connecting example using DIGITAL LINK (Only for PT‑EZ590, PT‑EW650 and PT‑EX620) Twisted-pair-cable transmitters based on the communication standard HDBaseTTM such as the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) use twisted pair cables - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 44
twisted-paircable transmitter. Check the operating instructions of the device to be connected. not be displayed. ff The projector does not support VIERA Link (HDMI). ff The maximum transmission Panasonic Corporation, and not all the operations have been verified. For operation or performance problems - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 45
Chapter 3 Basic Operations This chapter describes basic operations to start with. ENGLISH - 45 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 46
→ [ECO MANAGEMENT] → [STANDBY MODE] is set to [NORMAL]. Projection will start when the power button is pressed. ff The projector may not operate when the lamp indicator or the temperature indicator is blinking. (x page 138) 46 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 47
PT‑EW650 and PT‑EX620) *4 The indicator flashes in the cycle: 0.5 seconds (light) → 0.5 seconds (off). Note ff While the power indicator is lit in orange, the fan is running to cool the projector. ff For about 90 seconds after the projector is switched off and the luminous lamp - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 48
Chapter 3 Basic Operations - Switching on/off the projector When the initial setting screen is displayed When the projector is switched on for the first time after purchase as well as when [INITIALIZE ALL] in the [PROJECTOR SETUP] menu is executed, the focus adjustment screen is displayed after - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 49
Chapter 3 Basic Operations - Switching on/off the projector Set the screen format (aspect ratio) and display position of the image. After the [SCREEN FORMAT] initial setting is completed, you can change the settings of each item from the 87 [DISPLAY OPTION] menu → [SCREEN SETTING]. Set the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 50
(, , *1, , , ) buttons on the remote control to select the input signal. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 4) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 38) 5) Press the button to - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 51
power consumption during standby can be conserved. Direct power off function The projector can be turned off during projection or immediately after the luminous lamp is turned off by setting the switch to . In addition, when the projector is mounted on the ceiling or installed in - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 52
RGB1/2>, , ) buttons. ffSwitches the input, the input guide of the selected input terminal displayed on the top right of the ]. (x page 79) Note ff (Only for PT-EZ590, PT-EW650 and PT-EX620) When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 53
by pressing asqw on the remote control or the control panel from the [DETAILED] input guide. The input guide for [DETAILED] The input guide for [SIMPLE] [DIGITAL LINK] input is only for PT-EZ590, PT-EW650 and PT-EX620. If there is no signal input ([RGB2], [HDMI1] or [HDMI2]), this screen will be - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 54
projected screen in the home position (standard projection position). PT‑EZ590 / PT‑EW650 / PT‑EW550 Standard projection position 0.3 H 0.3 H Standard projection position PT‑EX620 / PT‑EX520 0.3 H 0.3 H 0.5 V 0.6 V Image height V Image height V 0.5 V 0.6 V Image width H Image width - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 55
the meeting intermission, for example, it is possible to turn off the image and the audio temporarily. rrShutter function (Only for PT‑EZ590, PT‑EW650 and PT‑EX620) button 1) Press the button. ffThe image and the audio disappear. ffThis operation can be also performed by using the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 56
Chapter 3 Basic Operations - Operating with the remote control Using the mute function Audio can be temporarily turned off. button 1) Press the button. ffThe audio disappears. 2) Press the button again. ffThe audio reappears. Adjusting the volume The volume of the built-in speaker or - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 57
Chapter 3 Basic Operations - Operating with the remote control Note ff If you press the button on the control panel for at least three seconds while the on-screen display is off (hidden), the [OSD] individual adjustment screen is displayed. Press qw to select [ON], then the on-screen display - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 58
Chapter 3 Basic Operations - Operating with the remote control Switching the aspect ratio of the image You can switch aspect ratios according to the input signal. button 1) Press the button. ffThe setting will change each time you press the button. Note ff Refer to the [POSITION] menu → [ - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 59
have been completed, the assigned menu item (main menu, sub-menu, or details menu) will be displayed in [ASSIGNED FUNCTION] of the operation guide under the menu. ff Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 97) when deallocating functions - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 60
Chapter 3 Basic Operations - Operating with the remote control 2) Press qw to select the test pattern. Note ff Setting is also available from the [TEST PATTERN] (x page 100) menu. ff Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 61
Chapter 3 Basic Operations - Operating with the remote control Setting the ID number of the remote control When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector individually by using single remote control, if unique ID number is - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 62
Chapter 4 Settings This chapter describes the settings and the adjustments you can make using the on-screen menu. 62 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 63
Chapter 4 Settings - Menu navigation Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector. Navigating through the menu Operating procedure button 1) Press the button on the remote control or the control panel. ffThe main menu screen - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 64
, execute the [PROJECTOR SETUP] menu → [INITIALIZE ALL]. (Æ page 104) ff Some items cannot be reset by pressing the button. Adjust each item manually. Main menu The following items are in the main menu. When a main menu item is selected, the screen changes to a sub-menu selection screen - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 65
]*5 [AUTO] 71 [RGB/YPBPR]/[RGB/YCBCR]*6 [AUTO] 71 *1 Depends on the [PICTURE MODE]. *2 Only for movie-based signals *3 Only for PT-EZ590, PT-EW650 and PT-EX620 *4 Depends on the [PROJECTION METHOD]. *5 Only when the terminal is selected *6 Only when the terminal/ - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 66
[OTHER FUNCTIONS] Factory default [BLUE] [AUTO] [AUTO] - *1 Only for PT‑EZ590, PT‑EW650 and PT‑EX620 [PROJECTOR SETUP] Page 90 90 90 90 91 Sub-menu item [STATUS] [PROJECTOR ID] [INITIAL START UP] [PROJECTION METHOD] [LAMP POWER] [ECO MANAGEMENT] [RS-232C] [REMOTE1 MODE] [FUNCTION BUTTON] [AUDIO - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 67
When [PICTURE MODE] is set to [DICOM SIM.], the [DAYLIGHT VIEW] is fixed to [OFF]. ff When [PICTURE MODE] is set to [DICOM SIM.], the [LAMP POWER] in the [PROJECTOR SETUP] menu is fixed to [ECO]. [CONTRAST] You can adjust the contrast of the colors. 1) Press as to select [CONTRAST]. 2) Press - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 68
Chapter 4 Settings - [PICTURE] menu Operation Press the w button. Press the q button. Adjustment Increases the brightness of the dark (black) parts of the screen. Reduces the brightness of the dark (black) parts of the screen. Range of adjustment -32 ~ +32 [COLOR] (Only for movie-based signal - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 69
button. Press the q button. Adjustment The midtones become brighter. The midtones become darker. Range of adjustment -8 ~ +7 [IRIS] (Only for PT-EZ590, PT-EW650 and PT-EX620) Aperture correction is performed automatically based on the image to result in an image of optimum contrast. 1) Press as - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 70
Chapter 4 Settings - [PICTURE] menu Items [BRIGHTNESS G] [BRIGHTNESS B] [DAYLIGHT VIEW] Operation Press the w button. Press the q button. Press the w button. Press the q button. Adjustment Emphasizes green in shadow areas. Deemphasizes green in shadow areas. Emphasizes blue in shadow areas. - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 71
will automatically detect the input signal, but you can set the color system manually when an unstable signal is input. Set the color system to match signal input Select [AUTO], [RGB] or [YPBPR]. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 Note ff Refer to "List of compatible signals" (Æ page 157) - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 72
work when the [FRONT/CEILING] or the [REAR/CEILING] feature is selected in [PROJECTION METHOD] in the [PROJECTOR SETUP] menu. [SCREEN ADJUSTMENT] (For PT-EZ590) You can correct the distortion of the projected image that occurs when the projector is installed tilted or when the screen is tilted or - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 73
Chapter 4 Settings - [POSITION] menu Adjusting [LENS THROW RATIO] 1) Press as to select [SCREEN ADJUSTMENT]. 2) Press the button. ffThe [SCREEN ADJUSTMENT] screen is displayed. 3) Press as to select [KEYSTONE]. 4) Press the button. ffThe [KEYSTONE] screen is displayed. 5) Press as - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 74
Chapter 4 Settings - [POSITION] menu 3) Press as to select [KEYSTONE]. 4) Press the button. ffThe [KEYSTONE] screen is displayed. 5) Press as to select [BALANCE]. 6) Press the button. ffThe [BALANCE] individual adjustment screen is displayed. 7) Press asqw to adjust the balance. - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 75
Chapter 4 Settings - [POSITION] menu ffThe [SCREEN ADJUSTMENT] screen is displayed. 3) Press as to select [CURVED CORRECTION]. 4) Press the button. ffThe [CURVED CORRECTION] screen is displayed. 5) Press as to select one item to adjust. [LENS THROW RATIO] [KEYSTONE] [ARC] [BALANCE] [ - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 76
] is used to perform various adjustments. ff Aspect ratio of the image size may shift depending on the correction. [SCREEN ADJUSTMENT] (For PT-EW650, PT-EW550, PT-EX620 and PT-EX520) You can correct the distortion of the projected image that occurs when the projector is installed tilted or when the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 77
Chapter 4 Settings - [POSITION] menu 5) Press as to select the item to adjust, then press the button. ffThe [CORNER CORRECTION] individual adjustment screen is displayed. 6) Press asqw to adjust. [UPPER LEFT] [CORNER CORRECTION] [UPPER RIGHT] [LOWER LEFT] [LOWER RIGHT] Setting [ - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 78
Chapter 4 Settings - [POSITION] menu ff When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next corner can also be displayed by pressing the button. ff Correcting up to ±35° for the tilt in the vertical direction and ±35° for - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 79
Chapter 4 Settings - [POSITION] menu Note ff Depending on the input signal, if the adjustment of [DOT CLOCK] exceeds the effective adjustment range of the input signal, the position of the image cannot be changed. Please adjust [DOT CLOCK] within an effective adjustment range. [CLOCK PHASE] (Only - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 80
has turned green. 1) Press as to select [CLAMP POSITION]. 2) Press qw to adjust. Status The black part is blunt. The black part is green. Rough guide for optimal value The point where bluntness of the black part improves the most is the optimal value. The point where the green part becomes - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 81
Chapter 4 Settings - [LANGUAGE] menu [LANGUAGE] menu On the menu screen, select [LANGUAGE] from the main menu, and display the sub-menu. Refer to "Navigating through the menu" (x page 63) for the operation of the menu screen. Changing the display language You can select the language of the on-screen - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 82
screen. [ON-SCREEN DISPLAY] Set the on-screen display. Setting [INPUT GUIDE] You can set the display method of the name of the input terminal → [LOWER LEFT] → [LOWER RIGHT] → [CENTER] → ... [OSD SIZE] (Only for PT-EZ590) Set the size of the menu screen (OSD). 1) Press as to select [ON-SCREEN - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 83
ff When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning status such as lamp replacement, temperature warning or air filter replacement is detected. [RGB IN] Set to match the signal to input to the terminal and the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 84
terminal and terminal. ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operation instruction of the external device regarding the output of the external device. ff The displayed signal level is assumed when the input is 30 bits - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 85
your computer or video device. [DIGITAL LINK IN] (Only for PT‑EZ590, PT‑EW650 and PT‑EX620) Set the signal level when DIGITAL LINK input is selected. 1) setting of the connected external device. Refer to the operation instruction of the external device regarding the output of the external device - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 86
Chapter 4 Settings - [DISPLAY OPTION] menu 2) Press the button. ffThe [DIGITAL LINK IN] screen is displayed. 3) Press as to select [EDID MODE]. 4) Press the button. ffThe [DIGITAL LINK EDID MODE] screen is displayed. 5) Press qw to switch [EDID MODE]. ffThe items will switch each - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 87
[SCREEN FORMAT] Description [16:10] The projected aspect ratio is 16:10. [16:9] The projected aspect ratio is 16:9. r For PT-EX620, PT-EX520 [SCREEN FORMAT] [4:3] [16:9] Description The projected aspect ratio is 4:3 The projected aspect ratio is 16:9. 5) Press as to select [SCREEN POSITION - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 88
[SCREEN FORMAT] is set to the following item. PT-EZ590, PT-EW650 and PT-EW550: [16:10] PT-EX620 and PT-EX520: [4:3] 6) Press qw to adjust the [ press the button. [DEFAULT LOGO] [USER LOGO] [OFF] Displays the Panasonic logo. Displays the image registered by the user. Disables the startup logo - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 89
LINK. Sets the input to DIGITAL LINK, and switches the input of Panasonic twisted-pair-cable transmitter to the specified input. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 *2 When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the projector - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 90
projection area in blue. Displays the entire projection area in black. Displays the Panasonic logo. Displays the image registered by the user. Note ff To create/ mode normally. Switches the item to [1280x1024] or [1400x1050] manually if the whole projected image is not displayed when SXGA signal - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 91
Chapter 4 Settings - [DISPLAY OPTION] menu Setting the countdown timer 1) Press as to select [P-TIMER]. 2) Press the button. ffThe [P-TIMER] screen is displayed. 3) Press as to select [TIMER]. 4) Press qw to set the time. ffThe time can be set in 1-minute increments from 1 to 180 minutes. - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 92
and move the image zoom position. For details, refer to "Using the digital zoom function". (Æ page 59) *1 Only for PT-EZ590, PT-EW650 and PT-EX620 *2 Only for PT-EW550 and PT-EX520 4) Press the button. Using the digital zoom function via the menu operation (Only for still image-based RGB - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 93
in the [STATUS] may be different from the actual times when a lamp unit that was attached to a different projector model is installed on this projector (PT-EZ590, PT-EW650, PT-EW550, PT-EX620, PT-EX520), or when the lamp unit that was attached to this projector is installed on a different projector - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 94
when you want to reduce power consumption, extend the life of lamp and reduce operation noise. ff The [LAMP POWER] is fixed to [ECO] when the [PICTURE] menu MODE] (x page 67) is set to [DICOM SIM.]. ff The [LAMP POWER] changes to [ECO] forcibly to protect the projector when the operating environment - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 95
when the shutter is closed. [AV MUTE DETECTION]*2 Lowers the power of the lamp when the [AV MUTE] is [ON]. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 *2 Only for PT-EW550 and PT-EX520 6) Press qw to switch the item. ff The items will switch each time you press the button. [ON] [OFF] Enables - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 96
and PT-EX520, proceed to step 5). 3) Press as to select [INPUT SELECT]. 4) Press qw to switch the item. [PROJECTOR] [DIGITAL LINK] Use the terminal of the projector to perform RS‑232C communication. Performs RS‑232C communication via the DIGITAL LINK output supported device (Model - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 97
the button. Note (Only for PT-EZ590, PT-EW650 and PT-EX620) ff When [INPUT SELECT] is set to [DIGITAL LINK], communication using that serial terminal is available only when the corresponding device (such as the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 98
Chapter 4 Settings - [PROJECTOR SETUP] menu Releasing assigned function to the button 1) Press as to select [FUNCTION BUTTON]. 2) Press the button. ffThe [FUNCTION BUTTON] screen is displayed. 3) Press the button. 4) When the confirmation screen is displayed, press qw to - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 99
[HDMI2] input is selected. Set the audio output when [DIGITAL LINK] input is selected. Set the audio output when [NETWORK] input is selected. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 4) Press qw to switch the item. ENGLISH - 99 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 100
[AUDIO IN 2] or [AUDIO IN 3]. Select one item among [NETWORK AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3]. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 [TEST PATTERN] Displays the test pattern built-in to the projector. Settings of position, size, and other factors will not be reflected in - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 101
Chapter 4 Settings - [PROJECTOR SETUP] menu 1) Press as to select [FILTER COUNTER]. 2) Press the button. ffThe [FILTER COUNTER] screen is displayed. 3) Press as to select [TIMER]. 4) Press qw to switch the setting of the timer. ffThe items will switch each time you press the button. [OFF] [ - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 102
the Panasonic twisted-pair-cable transmitter to the specified input. Sets the lamp brightness to high luminance. Sets the lamp brightness to low luminance. Audio output is stopped during standby. Audio is output during standby. Sets the volume. *1 For PT-EZ590, PT-EW650 and PT-EX620 *2 For PT-EW550 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 103
. ffThe [DATE AND TIME] screen is displayed. 3) Press as to select [TIME ZONE]. 4) Press qw to switch [TIME ZONE]. Setting the date and time manually 1) Press as to select [DATE AND TIME]. 2) Press the button. ffThe [DATE AND TIME] screen is displayed. 3) Press as to select [ADJUST CLOCK - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 104
values of [NETWORK] cannot be returned to the factory default values. For details about the initialization of [NETWORK], please refer to [NETWORK] → [INITIALIZE]. (Æ page 111) [SERVICE PASSWORD] This function is used by - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 105
Chapter 4 Settings - [SECURITY] menu [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu. Refer to "Navigating through the menu" (x page 63) for the operation of the menu screen. ffWhen the projector is used for the first time Initial - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 106
Chapter 4 Settings - [SECURITY] menu ffThe items will switch each time you press the button. [OFF] [TEXT] [USER LOGO] Hides the security message. Displays the text set in the [SECURITY] menu → [TEXT CHANGE]. Displays the image registered by the user. Note ff To create/register the [USER LOGO] - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 107
Chapter 4 Settings - [SECURITY] menu 2) Press the button. ffThe [CONTROL DEVICE SETUP] screen is displayed. 3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER]. [CONTROL PANEL] [REMOTE CONTROLLER] You can set the limitation on the control from the control panel. You can set the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 108
not connect correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method even if [DIGITAL LINK MODE] is set to [LONG REACH]. [DIGITAL LINK STATUS] (Only for PT‑EZ590, PT‑EW650 and PT‑EX620) Display DIGITAL LINK connection environment. 1) Press as to select - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 109
MENU] (Only for PT‑EZ590, PT‑EW650 and PT‑EX620) When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the terminal, the main menu of DIGITAL LINK output supported device is displayed. Refer to the Operating Instructions of the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 110
OFF] when connecting the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G). For details of the "XTP transmitter", refer to the website of Extron Electronics. URL http://www.extron.com/ *1 Only for PT-EZ590, PT-EW650 and PT-EX620 4) Press as to select [OK], and press - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 111
Chapter 4 Settings - [NETWORK] menu [WIRELESS LAN] [Presenter Light] [SSID]*1 [IP ADDRESS]*1 [LOGIN PASSWORD] Displays the character string of SSID. Displays the IP address. Displays the login password for Presenter Light/VueMagic used. *1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 112
Chapter 5 Operation of Function This chapter describes the operation methods of some functions. 112 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 113
://panasonic.net/cns/ projector/pass/). ffPresenter Light By using still image transfer application software "Presenter Light" that supports Windows computers, you can transfer images and audio to the projector via the wired LAN/wireless LAN. For details, please refer to the operating instructions - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 114
possible to transmit up to 150 m (492'2") if the twisted-pair-cable transmitter supports the long-reach communication method. However, the signal that the projector can receive is by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 115
IP ADDRESS (WIRED) will be displayed in the idle screen. ffYou can also press the button on the control panel and the input guide is displayed, then press asqw to switch to NETWORK input. ENGLISH - 115 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 116
PASSWORD : PROJECTOR NAME : SSID : IP ADDRESS(WIRELESS) : IP ADDRESS(WIRED) : 5678 Name1234 Panasonic Projector 172.28.120.1 192.168.1.100 Attention ff Please do not move or transport the projector meets the OS standard, follow the operation instruction of the utility to connect it. 116 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 117
.) By using still image transfer application software "Presenter Light" that supports Windows computers, you can transfer images and audio to the projector is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case). 4) Click [OK]. ffThe [Projector status] page is - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 118
or make a shortcut for convenient use. Note ff For more details about how to use the software "Presenter Light", please refer to the operating instructions of "Presenter Light Software" of the supplied CD-ROM. ff Download the latest versions of "Presenter Light" software from the following web site - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 119
on the NETWORK input idle screen. ffYou can also press the button on the control panel to select [NETWORK] in the input guide. 2) Choose the SSID of this projector on the wireless LAN setting screen of the connected device, and then connect the wireless. 3) Start the VueMagic - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 120
system devices connected via the network, from a computer. This projector supports "Crestron Connected™". ff For details of "Crestron Connected™", please refer to administrator rights) and the password is panasonic (lower case). 4) Click [OK]. ffThe [Projector status] page is displayed. 120 - - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 121
ff About computer screen illustrations The subsequent web control screens show examples for PT‑EZ590. Screen content may differ from that for the projector model you addition, the screen size and the display may be differ from this manual depending on the OS, WEB browser or the type of computer you - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 122
RUNTIME] Displays the runtime of the lamps (converted value). 14 [SELF TEST] Displays the self-diagnosis information. 15 [PROJECTOR RUNTIME] Displays the runtime of the projector. *1 [SHUTTER] is for PT-EZ590, PT-EW650 and PT-EX620. [AV MUTE] is for PT-EW550 and PT-EX520. Displays the status of the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 123
problem. [WARNING]: Indicates that there is a warning. rr[FAILED] items displayed when a problem occurs [FAN] [FAN(R_B)] [FAN(G)] [FAN(PBS)] [FAN(LAMP)] [FAN(REAR)] Item Description Trouble filter. (x page 140) *1 Only for PT-EZ590, PT-EW650 and PT-EX620 [Network status] page Click [Status] → - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 124
Chapter 5 Operation of Function - Web control function 1 [WIRELESS LAN] Displays the configuration details of wireless LAN when the wireless module is attached. [Access error log] page 2 [WIRED LAN] Displays the configuration details of wired LAN. Click [Status] → [Access error log]. The error - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 125
mode. 6 [CLOSED CAPTION] Switches the closed caption setting. *1 [DIGITAL LINK] is only for PT-EZ590, PT-EW650 and PT-EX620 *2 [SHUTTER] is for PT-EZ590, PT-EW650 and PT-EX620. [AV MUTE] is for PT-EW550 and PT-EX520,which switches the AV mute function on/off. [Advanced control] page Click - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 126
Chapter 5 Operation of Function - Web control function 2) Select the item which you want to change the setting, then click [Next]. ffThe current setting is displayed. 3) Click [Change] button. ffThe setting change screen is displayed. Wired LAN 1 2 3 4 5 6 7 8 1 [PROJECTOR NAME] Enters the name of - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 127
Chapter 5 Operation of Function - Web control function Wireless LAN (Only when the wireless module is attached) 1 2 3 4 5 6 1 [WIRELESS LAN] Selects [Enable] when you want to enable the wireless LAN function. 2 [SSID] Sets the SSID for use. 3 [CHANNEL] Selects the channel for use. 4 [ENCRYPTION] - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 128
the time that the lamp is turned off when the POWER MANAGEMENT function is using. 4 [SIGNAL DETECTION] Selects enable ([ON])/disable ([OFF]) of the no signal interlock function. 8 [Submit] Updates the settings. *1 [SHUTTER DETECTION] is for PT-EZ590, PT-EW650 and PT-EX620 [AV MUTE DETECTION] is - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 129
error occurred in the self-diagnosis. [LAMP RUNTIME]: Sends an E-mail when the remaining time for the lamp has reached the value set at the 6 7 8 1 [Auth] Selects the authentication method specified by your Internet service provider. 2 [SMTP Auth] Set when the SMTP authentication is selected. 3 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 130
function === Panasonic projector report(CONFIGURE) === Projector Type : PT-EZ590 Serial No : SH1234567 ----- E-mail setup data ----- TEMPERATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INTAKE AIR TEMPERATURE Over [ 45 degC / 113 degF ] ERROR LAMP RUNTIME LAMP RUNTIME INTAKE - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 131
Panasonic projector report(ERROR) === Projector Type : PT-EZ590 Serial No : SH1234567 ----- check system ----- FAN [ OK ] INTAKE AIR TEMPERATURE [ OK ] EXHAUST AIR TEMPERATURE [ OK ] LAMP REMAIN TIME [ OK ] LAMP *1 Only for PT-EZ590, PT-EW650 and PT-EX620 [Adjust clock] time manually. - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 132
Chapter 5 Operation of Function - Web control function Note ff The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult your dealer. [Change password] page Click [Change password]. 1 2 3 1 [Administrator] Used to - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 133
clicking [Crestron Connected(TM)]. It is not displayed if Adobe® Flash® Player is not installed on the computer used, or the browser used does not support Flash. In that case, click [Back] on the control page to go back to the previous page. ENGLISH - 133 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 134
related to freeze/image quality/digital zoom. 7 [Back] Performs return to the previous page. *1 [SHUTTER] is for PT-EZ590, PT-EW650 and PT-EX620. [AV MUTE] is for PT-EW550 and PT-EX520, which switches the AV mute function on/off. [Tools] page Click [Tools] on the control page. 1 2 1 [Control - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 135
Click [Info] on the control page. 1 2 3 1 [Projector Name] Displays the projector name. 2 [Mac Address] Displays the MAC address. 3 [Lamp Hours] Displays the runtime of the lamps (converted value). 4 [Power Status] Displays the status of the power. [Help] page Click [Help] on the control page. The - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 136
Chapter 6 Maintenance This chapter describes methods of inspection when there are problems, maintenance, and replacement of the units. 136 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 137
indicator lights up when the runtime of the lamp unit reaches 3 800 hours (when [LAMP POWER] is set to [NORMAL]). Blinking in red (1 time) The lamp unit is not installed. Blinking in red (3 times) A problem is detected in the lamp or the power supply for the lamp. ff Have you turned on the ff Is - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 138
still lit or blinking after taking the preceding measures, ask your dealer for repair. ff If the [PROJECTOR SETUP] menu → [LAMP POWER] is set to [NORMAL], [LAMP POWER] changes to [ECO] forcibly to protect the projector when the operating environment temperature becomes 40 °C (104 °F) or higher (35 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 139
, or rubbing alcohol, other solvents, or household cleaners. Doing so may deteriorate the outer case. ggWhen using chemically treated dust cloths, follow the instructions written on its packaging. Lens front surface Wipe off dirt and dust from the front surface of the lens with a soft clean cloth - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 140
Chapter 6 Maintenance - Maintenance/replacement ffPull out the air filter cover from the hook of the projector while slightly pushing upward the tabs of the air filter cover and open it in the direction of the arrow in figure. ffWhen pulling open the air filter cover, be sure to firmly hold the air - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 141
Chapter 6 Maintenance - Maintenance/replacement 3) Press the button. 4) Press as to select [FILTER COUNTER]. 5) Press the button. ffThe [FILTER COUNTER] screen is displayed. 6) Press as to select [FILTER COUNTER RESET]. 7) Press the button. ffThe [FILTER COUNTER RESET] screen - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 142
takes no responsibility for any damage or malfunction of the product resulting from use of lamp units which are not manufactured by Panasonic. Use only specified lamp units. Note ff The model numbers of accessories and optional accessories are subject to change without prior notice. ff A Phillips - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 143
or loosen the screws other than specified ones when replacing the lamp unit. ff Make sure to attach the lamp unit and the lamp cover securely. Lamp cover Lamp unit fixing screws ii) i) Fig. 1 Lamp cover fixing screw Fig. 2 Handles Lamp unit 1) Turn off the power of the projector and set the - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 144
Chapter 6 Maintenance - Maintenance/replacement Note ff When you replace the lamp unit with new one, the projector resets the runtime of the lamp unit automatically. Air filter unit When the dust remains after cleaning, it is time to replace the air filter. The Replacement Filter Unit (Model No.: - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 145
Troubleshooting Troubleshooting Review the following points. For details, see the corresponding pages. Problems lamp indicator or the temperature indicator lit or blinking? ff Is the lamp on the computer type, refer to the user manual provided with your computer.) Page ― 51 ― - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 146
Chapter 6 Maintenance - Troubleshooting Problems Video from HDMI compatible device does -cable transmitter being input? ff Perform [LENS CALIBRATION]. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 Attention ff If problems persist even after checking the preceding points, consult your dealer. Page 41 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 147
Chapter 7 Appendix This chapter describes specifications for the projector. ENGLISH - 147 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 148
Lamp off, 1 = Lamp on Returns the name set in [PROJECTOR NAME] of [NETWORK]. Returns manufacturer name. Returns model name. Returns information such as version number. Returns class for PJLink. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 *2 For PT-EZ590, PT-EW650 and PT-EX620 *3 Only for PT-EW550 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 149
user name for the web control (default user name is "admin1") Password of above administrator rights user (default password is "panasonic") 8-byte random number obtained in Step 2) Command transmission method Transmit using the following command formats. rrTransmitted data Command example Data - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 150
rrError response Chapter 7 Appendix - Technical information Message Data length String "ERR1" "ERR2" "ERR3" "ERR4" "ERR5" "ERRA" 4 bytes Details Undefined control command Out of parameter range Busy state or no-acceptable period Timeout or no-acceptable period Wrong data length Password mismatch - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 151
rrError response Message Data length String "ERR1" "ERR2" "ERR3" "ERR4" "ERR5" "ERRA" 4 bytes Chapter 7 Appendix - Technical information Details Undefined control command Out of parameter range Busy state or no-acceptable period Timeout or no-acceptable period Wrong data length Password mismatch - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 152
9p (female) Computer D-Sub 9p (male) Communication cable (straight) When connecting with DIGITAL LINK compatible devices (Only for PT-EZ590, PT-EW650 and PT-EX620) Projector connecting terminals DIGITAL LINK compatible device DIGITAL LINK DIGITAL LINK D-Sub 9p (female) Computer LAN cable - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 153
are not necessary. Attention ff If a command is transmitted after the lamp starts illuminating, there may be a delay in response or the command response is sent from the projector to the computer. ff ID transmission in RS‑232C supports ZZ (ALL) and 01 to 64. ff If a command is sent with a - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 154
)/AV mute function on 0 Stand-by 1 Lamp ON control active 2 Lamp ON 3 Lamp OFF control active 0 AUTO 1 NORMAL 2 WIDE 5 NATIVE 6 FULL 9 H FIT 10 V FIT *1 Only for PT-EZ590, PT-EW650 and PT-EX620 *2 Only for PT-EW550 and PT-EX520 rrProjector control command (with sub command - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 155
Contact control Remote control/Contact control Standby Lit Lamp RGB1 HDMI1 RGB2 HDMI2 Installation locations in meeting remote Controlled by external control contact *1 For PT-EZ590, PT-EW650 and PT-EX620 [AV MUTE] for PT-EW550 and PT-EX520 Attention ff When controlling, make sure - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 156
Chapter 7 Appendix - Technical information [MENU LOCK PASSWORD] operations To initialize your password, consult your distributor. 156 - ENGLISH - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 157
Chapter 7 Appendix - Technical information List of compatible signals The following table specifies the video signals compatible with the projector. ffSymbols that indicate formats are as follows. gg V: VIDEO, Y/C gg R: RGB gg Y: YCBCR/YPBPR gg H: HDMI/DIGITAL LINK Mode Display resolution (dots) - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 158
supported. *4 VESA CVT-RB (Reduced Blanking)-compliant *5 Only for PT‑EW650 and PT-EW550 *6 Only for PT‑EZ590 Note ff The number of display dots for PT‑EZ590 is 1 920 x 1 200. The number of display dots for PT‑EW650 and PT-EW550 is 1 280 x 800. The number of display dots for PT‑EX620 and PT‑EX520 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 159
PT-EW650A, PT-EW650D, PT‑EX620, PT‑EX620A, PT‑EX620D, PT‑EW550, PT‑EW550A, PT‑EW550D, PT‑EX520, PT‑EX520A, PT‑EX520D PT‑EZ590T PT-EW650T, PT‑EX620T, PT‑EW550T, PT‑EX520T PT‑EZ590, PT-EZ590A, PT-EZ590D, PT-EW650, PT-EW650A, PT-EW650D, PT‑EX620, PT‑EX620A, PT‑EX620D, PT‑EW550, PT‑EW550A, PT‑EW550D, PT - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 160
145 mm (5-11/16") (with legs at shortest position) Dimensions Depth PT‑EZ590, PT-EW650, PT‑EW550, PT‑EX620, PT‑EX520 398.3 mm (15-11/16") (including standard zoom lens) PT‑EZ590L, PT-EW650L, PT‑EW550L, PT‑EX620L, PT‑EX520L 358 mm (14-3/32") (excluding optional lens) Weight Approx. 8.4 k] (18 - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 161
only (DC 5 V, maximum 900 mA) *1 Only for PT-EZ590, PT-EW650 and PT-EX620 rrApplicable scanning frequency Refer to "List of compatible signals" (x page : 148.5 MHz or less ff The SYNC/HD and VD terminals do not support 3 value SYNC. ff Displayable resolution for movie-based signals: 480i/576i*1 to - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 162
Dimensions Unit: mm Chapter 7 Appendix - Dimensions 358 (14-3/32") 40.3 (1-11/16") 73.5 (2-7/8") 78.5 (3-3/32") 218.5 (8-19/32") 249 (9-13/16") 437 (17-3/16") 498 (19-19/32") * The above dimensions are obtained when the standard zoom lens is attached. * Actual dimensions may differ depending on - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 163
by Panasonic, optional Ceiling Mount Bracket combinations not specified , installation method not described in installation manual, optional use electric screwdrivers or impact screwdrivers. ff Read the Installation Instructions for the Ceiling Mount Bracket for details. ff The model numbers - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 164
52 Installation mode 31 L Lamp cover 27 Lamp indicator 137 [LAMP POWER 94 button input signal 52 terminal 152 [SERVICE PASSWARD 104 Setting up 31 [SHARPNESS 68 [SHIFT control 25, 59 [TEXT CHANGE 106 [TINT 68 Troubleshooting 145 [TV-SYSTEM 71 V button Remote - Panasonic PT-EW550 | PT-EZ590 Series Operating Instructions - Page 165
. Panasonic Corporation Web Site: https://panasonic.net/cns/projector/ © Panasonic Corporation 2016 Panasonic System Solutions Company of North America Two Riverfront Plaza, Newark, NJ 07102 TEL: (877) 803 - 8492 Panasonic
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
 |
 |
Thank you for purchasing this Panasonic product.
■
This manual is intended for products manufactured from Aug. 2018 and beyond.
■
This manual is common to all the models regardless of suffixes of the Model No.
z
for Taiwan
T: The standard zoom lens supplied
z
for India
D: The standard zoom lens supplied
z
for Asia (except for Taiwan, India, Korea)
A: The standard zoom lens supplied
LA: The lens sold separately
z
for other countries or regions
Without L: The standard zoom lens supplied
With L: The lens sold separately
■
Before operating this product, please read the instructions carefully and save this manual
for future use.
■
Before using this product, be sure to read “Read this first!” (
x
pages 4 to 13).
TQBJ0950-4
LCD Projector
Commercial Use
Operating Instructions
Functional Manual
ENGLISH
Model No.
PT-EZ590
PT-EW650
PT-EW550
PT-EX620
PT-EX520