Panasonic AJ-PX5000G Operating Instructions - Page 150
White Balance Mode
View all Panasonic AJ-PX5000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Chapter 7 Menu Operations - Menu list Item [COLOR BARS] [WFM] [WFM DISP] [S.GAIN OFF] [DS.GAIN OFF] [D.ZOOM x2] [D.ZOOM x3] [D.ZOOM x4] [FBC(SHUTTER ON)] [RC CHECK SW] Description of settings Remark Selects the color bar to use. [SMPTE] Uses SMPTE standard color bars. [FULL BARS] Uses full color bars. [SPLIT] Uses SPLIT color bars for SNG (Satellite News Gathering). [ARIB] Uses ARIB standard color bars. Selects the type of waveform to be displayed on the viewfinder screen or LCD monitor when the buttons (//) to which the waveform monitor function is assigned is pressed. [WAVE] Displays as a waveform. [VECTOR] Displays as a vector. [WAVE/ VECTOR] Each time the button is pressed, the display changes in order from no display → waveform display → vector display → no display. Selects whether to display the waveform monitor on the viewfinder or on the LCD monitor. [VF] Displays on the viewfinder. [LCD] Displays on the LCD monitor. [VF/LCD] Displays on the viewfinder and the LCD monitor. Selects a method to release super gain mode. [L/M/H] Released by changing the switch or switch ( button). [S.GAIN] Released by the switch ( button) only. Selects a method to release digital super gain mode (accumulated gain). [L/M/H] Released by changing the switch or switch ( button). [DS.GAIN] Released by the switch ( button) only. Selects whether to enable 2x when digital zoom is assigned to the button of the camera. [ON], [OFF] Selects whether to enable 3x when digital zoom is assigned to the button of the camera. [ON], [OFF] Selects whether to enable 4x when digital zoom is assigned to the button of the camera. [ON], [OFF] Selects whether to permit the operation of the flash band compensation (FBC) function when the switch is set to . [ENABLE] Permits the operation of the flash band compensation function with the button. [DISABLE] Forbids the operation of the flash band compensation function with the button. Selects camera operation when the remote control unit (AJ‑RC10G) ffThis item is scheduled to be supported in future button or the extension control unit button is pressed. upgrades. [REC CHECK] Recording check function is enabled. [PLAY] Performs playback. are factory settings. [WHITE BALANCE MODE] Item [FILTER INH] [SHOCKLESS AWB] Description of settings Selects whether white balance memory (Ach or Bch) data is held or not held for each CC filter. [ON] Holds Ach and Bch memory data (2 memories), regardless of the CC filter. [OFF] Holds Ach and Bch memory data (8 memories), for each CC filter. When the position of the switch is changed, set the time until when the white balance starts at the changed position. [FAST] Approx. 1 second [NORMAL] Approx. 2 seconds [SLOW1] Approx. 3 seconds [SLOW2] Approx. 10 seconds [SLOW3] Approx. 20 seconds [OFF] Moves instantly. Remark are factory settings. - 150 -