Panasonic AJ-PX5000G Operating Instructions - Page 142
S] Camera Setting
View all Panasonic AJ-PX5000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Chapter 7 Menu Operations - Menu list Item Description of settings Remark [GAMMA MODE SEL] Selects the gamma curve. [HD] The video gamma feature for HD (High Definition). [SD] Increases gain in darker areas more than HD gamma. [FILMLIKE1] Feature that reproduces more highlight areas compared to HD gamma. [FILMLIKE2] Feature that reproduces more highlight areas compared to [FILMLIKE1]. [FILMLIKE3] Feature that reproduces more highlight areas compared to [FILMLIKE2]. [FILM‑REC] The cine-like gamma feature for film. [VIDEO‑REC] The cine-like gamma feature for video. ffWhen [FILMLIKE3] is used, it is recommended to configure the following settings at the main menu → [PAINT] → [KNEE/LEVEL]. - [[S] MANUAL KNEE]: [ON] - [KNEE MASTER POINT]: [85.0%] - [KNEE MASTER SLOPE]: [50] ffIf set [FILM‑REC] or [VIDEO‑REC], auto knee is disabled. ffAuto knee is disabled if the remote control unit (AJ‑RC10G) is connected, but when the AJ‑RC10G button is pressed, the LED of button lights. [F‑REC DYNAMIC LVL] When [FILM‑REC] is selected in [GAMMA MODE SEL], dynamic range is set. If an item other than [FILM‑REC] is selected, no settings are changed. [200%], [300%], [400%], [500%], [600%] [F‑REC BLACK STR LVL] When [FILM‑REC] is selected in [GAMMA MODE SEL], black stretch is set. If an item other than [FILM‑REC] is selected, no settings are changed. [0%]...[30%] [V‑REC KNEE SLOPE] When [VIDEO‑REC] is selected in [GAMMA MODE SEL], knee slope is set. If an item other than [VIDEO‑REC] is selected, no settings are changed. [150%], [200%], [250%], [300%], [350%], [400%], [450%], [500%] [V‑REC KNEE POINT] When [VIDEO‑REC] is selected in [GAMMA MODE SEL], knee point is set. If an item other than [VIDEO‑REC] is selected, no settings are changed. [30%]...[107%] are factory settings. [FILMLIKE1] [SD] Image level [HD] [FILMLIKE3] [FILMLIKE2] [FILM-REC] [VIDEO-REC] Luminosity [[S] CAMERA SETTING] Item [SHOOTING MODE] [DETAIL] [2D LPF] [GAMMA] [TEST SAW] [FLARE] [H‑F COMPE.] Description of settings Selects the shooting mode according to the shooting environment. [NORMAL] Selects normal sensitivity. (Applies during shooting in normal brightness.) [HIGH SENS.] Selects high-sensitivity. (Appropriate when shooting in a dark environment.) [H.SENS.] is displayed on the viewfinder screen. Switches the detail signal [ON]/[OFF]. [ON], [OFF] Sets a 2D low-pass filter to reduce cross colors. [ON] Reduces cross colors. [OFF] Does not reduce cross colors. Enables/disables gamma correction. [ON], [OFF] Enables/disables the test signal. [ON], [OFF] Enables/disables flare correction. [ON], [OFF] Enables/disables aperture correction. [ON], [OFF] Remark ffIf [NORMAL] is selected, [−6dB] cannot be assigned to // on the switch. ffOperates during 480/59.94i only. are factory settings. ffAll [[S] CAMERA SETTING] items are targets of [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. - 142 -