Panasonic AJ-HPX3100GJ Operating Instructions - Page 94
Turn the JOG dial button to select a desired, number 1 - 8. Then, press the dial button.
View all Panasonic AJ-HPX3100GJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
14 To exit the menu, press the MENU button. The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen. 5 Press the JOG dial button to display the following message: Notes z It is possible to overwrite the setup file on the unit with a setup file from another device. Note that if the file is overwritten, the original setup file from the other device will be lost. z We recommend managing the respective SD memory cards on the respective devices independently. To read data on an SD memory card Select the type of the menu to read from the screen in advance, and then perform the reading from the SD memory card via the following procedure. 1 Navigate the menu to the screen. READ? YES # NO 6 Turn the JOG dial button to move the cursor to YES. Then, press the dial button. When the data has been read, the following message appears: To select a file number 2 Turn the JOG dial button to move the cursor to the menu option R. SELECT. Then, press the dial button. < SD CARD READ/WRITE > # R.SELECT 1 READ W.SELECT 1 WRITE CARD CONFIG TITLE READ TITLE: 1: ******** 2: ******** 3: ******** 4: ******** 5: ******** 6: ******** 7: ******** 8: ******** 3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button. To read data on a selected file 4 Turn the JOG dial button to move the cursor to the option READ. < SD CARD READ/WRITE > R.SELECT :1 # READ W.SELECT :1 WRITE CARD CONFIG TITLE READ TITLE: 1: ******** 2: ******** 3: ******** 4: ******** 5: ******** 6: ******** 7: ******** 8: ******** READ OK The data will not be read if any of the following messages appears when the JOG dial button is pressed: Error message Remedy READ NG Insert an SD memory card. NO CARD (No SD memory card inserted.) READ NG FORMAT ERROR (SD memory card not properly formatted.) The card has not been formatted using the unit. Replace the card. READ NG NO FILE (No file found.) Write file data. READ NG Only data written with the unit is ERROR readable. (SD memory card not readable.) READ NG CANNOT ACCCESS (SD memory card not accessible.) Example: The SD memory card is not accessible because it is being played back. After the operation in process, read data. 7 To exit the menu, press the MENU button. The settings menu will be replaced by status indications for the unit. 94 Adjustments and Settings for Recording : Handling data