Panasonic AJ-HPX3100GJ Operating Instructions - Page 177

Menu VF The ____ in the Adjustable Range column indicates the preset mode. VF DISPLAY ZEBRA Pattern Display Video Level Items/ Adjustable Data Saved Range Remarks ON 109% DISP NORMAL CONDITION HOLD - CU F R NORMAL: Display status constantly. HOLD: Display status only when the MARKER SEL, MODE CHK / MENU CANCEL switch is pulled. DISP MODE 1 2 3 - CU F R Set the DISP MODE. Switch the camera's Warning/Message indication. Please refer to [Display Modes and Setting Changes/adjustment Result Messages] (page 85) for more information. ZEBRA 2 DETECT ZEBRA 1 DETECT VF OUT Y For selecting the video signals to display NAM in the viewfinder screen. R Y: Brightness signal G NAM: Output signal with the highest level 0% B among R, G, and B signals. R: Rch signal G: Gch signal - CU F R B: Bch signal VF DTL 00 : 05 : 10 - CU F R For setting the detail level of the viewfinder screen. The details of the signals for the viewfinder are further enhanced. If 00 is selected, then the detail is the same as that for the main line. ZEBRA1 0% DETECT : 70% : - C U F R 109% Set the ZEBRA1 detection level (IRE value). ZEBRA2 0% DETECT : 85% : - C U F R 109% Set the ZEBRA2 detection level (IRE value). ZEBRA2 ON SPOT - C U F R OFF Set the ZEBRA2 to ON, OFF, or SPOT. LOW LIGHT OFF LVL 10% 15% 20% 25% 30% - C U F R 35% Set the camera incoming light volume at which to display LOW LIGHT. RC MENU ON DISP. OFF - CU F R For the setting to display the menu in the viewfinder screen when the remote control unit or the extension control unit is connected to the unit. MARKER 50% CHAR LVL 60% 70% 80% 90% - C U F R 100% Adjust the brightness of markers and characters displayed on the VF. SYNCHRO sec SCAN DISP. deg - CU F R For setting the unit to indicate SYNCHRO SCAN mode. sec: indicates time deg: indicates the opening angle of the shutter. ZEBRA 2 OFF SPOT Menu: Menu Description Tables 177