Panasonic AJ-HPX3100GJ Operating Instructions - Page 117
Attaching the F.AUDIO LEVEL control Knob, Connection of the DC OUT connector and the external REC
View all Panasonic AJ-HPX3100GJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Attaching the F.AUDIO LEVEL control Knob If you use the F.Audio Level control frequently, attach the accessory knob so that it can be easily operated. Remove the screw in the center of the F.Audio Level control, and attach the accessory knob using the screw (included). When attaching the knob, be sure to align the marks on the control with the marks on the knob. F.Audio Level Control Screw Marks Î Knob (Accessory) Screw (Accessory) Connection of the DC OUT connector and the external REC strat/stop switch It is possible to draw 1.5 A current from the DC OUT connector of the unit. REC start/stop can be controlled by connecting an external switch to this connector. Since a tally lamp can be used by connecting an LED to this connector, it is useful for shooting video when fixing the camera on a crane. (Reference connection example) 41 32 Connector at the cable side HR10A-7R-4P(73) (Hirose Denki) > [Connector Signals] (page 149) Preparation DC OUT connector LED Resistance REC start/stop 1: GND 2: TALLY OUT Open collector output on the unit side TALLY ON: Low impedance TALLY OFF: High impedance 3: REC start/stop switch (DC 11 V - 17 V) This is connected in parallel to the REC START button on the unit or the VTR button on the lens 4: 12 V Note Ensure that polarity is correct before connecting an external device, as failure to do so may result in damage. Preparation: Attaching the F.AUDIO LEVEL control Knob 117