Marantz HD-AMP1 Owner s Manual in English
Marantz HD-AMP1 Manual
 |
View all Marantz HD-AMP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz HD-AMP1 manual content summary:
- Marantz HD-AMP1 | Owner s Manual in English - Page 1
Contents . Connections Playback Settings Tips Appendix Integrated Amplifier HD-AMP1 Front panel You can print more than one page of a PDF onto a single sheet of paper. Display Rear panel 1 Remote Owner's Manual Index - Marantz HD-AMP1 | Owner s Manual in English - Page 2
unit Playback Settings Tips Appendix 5 Connections 6 6 Connecting speakers 17 6 Speaker connection 19 7 Connecting an audio playback device 20 7 RC on this unit without visual contact 24 9 Remotely connecting Marantz audio devices 24 11 Connecting the power cord 25 12 13 Front - Marantz HD-AMP1 | Owner s Manual in English - Page 3
brightness 29 Balance Using as a D/A converter 30 Filter Connecting and playing back from a computer (USB-DAC) 31 H/P Gain Connect and playback from a digital device (COAX/OPT1/OPT2) 40 Dimmer Playing back an iPod 41 iPodMode Playing an iPod 42 AutoStby Setting operation mode (On-Display - Marantz HD-AMP1 | Owner s Manual in English - Page 4
Contents Connections Tips Contents Tips Troubleshooting Appendix Playing back a USB memory devices Playback order of files About folders and files How to handle media D/A converter Explanation of terms Trademark information Specifications - Marantz HD-AMP1 | Owner s Manual in English - Page 5
this Marantz product. To ensure proper operation, please read this owner's manual carefully before using the product. After reading this manual, . Tips Appendix . Quick Start Guide CD-ROM (Owner's Manual) Safety Instructions Warranty (for USA/for CANADA) Power cord Remote control unit R03 - Marantz HD-AMP1 | Owner s Manual in English - Page 6
Contents Connections Playback About the remote control Inserting the batteries A Remove the rear lid in the direction of the arrow and remove it. Settings Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two - Marantz HD-AMP1 | Owner s Manual in English - Page 7
is equipped with oversampling and digital filter functions using an original algorithm created by Marantz. The unit supports PCM and analog input signals. Toggle between the two types to suit your preferences. 0 High grade headphone circuit This unit has a two-amplifier structure based on the design - Marantz HD-AMP1 | Owner s Manual in English - Page 8
sound sources This unit supports the playback of high resolution audio formats such as DSD (2.8/5.6/11.2 MHz) and PCM files up to 384 kHz/32 bits. It provides high quality playback of high resolution files into this unit from a computer via USB-B connection. 0 DIGITAL AUDIO IN connectors (COAXIAL - Marantz HD-AMP1 | Owner s Manual in English - Page 9
Contents Connections Playback Part names and functions For buttons not explained here, see the page indicated in parentheses ( ). Front panel qw e Settings r Tips t Appendix y ui o Q0 . A Power operation button (X) This turns the power on/off (standby). (v p. 27) C Input source select - Marantz HD-AMP1 | Owner s Manual in English - Page 10
jack (PHONES) Used to connect headphones. 0 When the headphones are plugged into this jack, audio will no longer be output from the speaker terminals, SUBWOOFER OUT connector. 0 "S.Direct" is set to "On" when headphones are connected. (v p. 52) NOTE 0 To prevent hearing loss, do not raise - Marantz HD-AMP1 | Owner s Manual in English - Page 11
Contents Connections Playback Settings Tips Display The input source name, sampling frequency, setting values and other information are displayed here. o D/A converter display o iPod/USB playback indicator Appendix .. q w A Input source indicator This indicator displays the selected - Marantz HD-AMP1 | Owner s Manual in English - Page 12
equipped with analog audio connectors. (v p. 20) B SUBWOOFER OUT connector Used to connect a subwoofer with a built-in amplifier. (v p. 19) C Speaker terminals (SPEAKERS) Used to connect speakers. (v p. 19) t y D DIGITAL AUDIO IN connectors Used to connect a computer or devices equipped with - Marantz HD-AMP1 | Owner s Manual in English - Page 13
Contents Connections Remote control unit q w e r t DIMMER POWER OPT 1 OPT 2 COAX ANALOG 1 ANALOG 2 iPod/USB USB-DAC RANDOM REPEAT MODE INFO MUTE VOLUME BACK SETUP Playback Settings Tips Appendix A DIMMER button Adjust the display brightness of this unit. (v p. 29) B Input - Marantz HD-AMP1 | Owner s Manual in English - Page 14
Contents Connections Playback DIMMER POWER OPT 1 OPT 2 COAX ANALOG 1 ANALOG 2 iPod/USB USB-DAC RANDOM REPEAT o Q0 y MODE INFO MUTE VOLUME u i BACK SETUP Settings Tips Appendix F Information button (INFO) This switches display items such as the album name and title name in the - Marantz HD-AMP1 | Owner s Manual in English - Page 15
Contents Connections Playback DIMMER POWER OPT 1 OPT 2 COAX ANALOG 1 ANALOG 2 iPod/USB USB-DAC RANDOM REPEAT MODE INFO MUTE VOLUME Q1 Q2 Q3 Q4 Q5 BACK SETUP Q6 Settings Tips Appendix K REPEAT button (L) Switches the repeat playback. 0 iPod:"Performing repeat playback" (v p. 44) - Marantz HD-AMP1 | Owner s Manual in English - Page 16
Tips Appendix o Cables used for connections Provide necessary cables according to the devices you want to connect. Speaker cable Audio cable L L R R Remote connector cable Optical cable Coaxial digital cable USB cable (supplied) Front panel Display Rear panel 16 Remote Index - Marantz HD-AMP1 | Owner s Manual in English - Page 17
NOTE 0 Disconnect this unit's power plug from the power outlet before connecting the speakers. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch - Marantz HD-AMP1 | Owner s Manual in English - Page 18
Contents Connections Spade lug connector Playback Settings Tips Appendix .. Banana plug NOTE 0 When using banana plugs, rotate the terminals clockwise to tighten them before inserting the banana plugs. Front panel Display Rear panel 18 Remote Index - Marantz HD-AMP1 | Owner s Manual in English - Page 19
Contents Connections Speaker connection Playback Subwoofer Settings Tips Speakers (R) (L) wq wq AUDIO IN ANALOG1 R L ANALOG2 R L COAXIAL DIGITAL AUDIO IN OPTICAL USB-DAC 1 2 AUDIO OUT SUB WOOFER OUT REMOTE CONTROL IN OUT AC IN Appendix . Front panel Display Rear - Marantz HD-AMP1 | Owner s Manual in English - Page 20
Tips Appendix Connecting an audio playback device Connect the AUDIO IN or DIGITAL AUDIO IN to an audio playback device (CD player, Digital device, etc...) using the appropriate cables. Analog device AUDIO OUT RL Digital device COAXIAL OUT OPTICAL OUT RL RL AUDIO IN ANALOG1 R L ANALOG2 - Marantz HD-AMP1 | Owner s Manual in English - Page 21
L COAXIAL DIGITAL AUDIO IN OPTICAL USB-DAC 1 2 AUDIO OUT SUB WOOFER OUT REMOTE CONTROL IN OUT AC IN . 0 Before USB connecting this unit to your computer, install the driver software in your computer. (v p. 31) 0 Download the driver software from the HD-AMP1 page of the Marantz website - Marantz HD-AMP1 | Owner s Manual in English - Page 22
instructions see "Playing an iPod" (v p. 42) or "Playing files stored on USB memory devices" (v p. 46). USB memory device iPod or Appendix . 0 Marantz PC via the front panel's USB port. Connection to a PC is possible via the digital input USB-DAC port (Type B) on the rear panel. 0 Do not use an - Marantz HD-AMP1 | Owner s Manual in English - Page 23
Contents Connections o Supported iPod/iPhone models • iPod classic Playback Settings Tips Appendix • iPod nano • iPod touch • iPhone . Front panel Display Rear panel 23 Remote Index - Marantz HD-AMP1 | Owner s Manual in English - Page 24
REMOTE CONTROL IN OUT AUDIO OUT SUB WOOFER OUT REMOTE CONTROL IN OUT AC IN Remotely connecting Marantz audio devices You can transmit remote control signals simply by connecting a Marantz audio device to the REMOTE CONTROL IN/OUT connectors using the remote connection cable provided with the - Marantz HD-AMP1 | Owner s Manual in English - Page 25
Contents Connections Playback Settings Tips Connecting the power cord Wait until all connections have been completed before connecting the power cord. AUDIO OUT SUB WOOFER OUT REMOTE CONTROL IN OUT AC IN Appendix To household power outlet (AC 120 V, 60 Hz) Power cord (supplied) . - Marantz HD-AMP1 | Owner s Manual in English - Page 26
Contents Connections o Contents Turning the power on Selecting the input source Adjusting the volume Turning off the sound temporarily (Muting) Switching the display's brightness Playback Settings Tips Appendix 27 Using as a D/A converter 30 28 Playing back an iPod 41 28 Playing a USB - Marantz HD-AMP1 | Owner s Manual in English - Page 27
Contents Connections Basic operation Playback DIMMER Input source select buttons POWER X VOLUME df MUTE Settings Tips Appendix Turning the power on 1 Press POWER X to turn on power to the unit. The power indicator turns off. o Switching the power to standby 1 Press POWER X. The unit - Marantz HD-AMP1 | Owner s Manual in English - Page 28
Contents Connections Playback Settings Tips Appendix Selecting the input source 1 Press the input source select button to be played back. USB-DAC: COAX: OPT1: OPT2: iPod/USB: ANALOG 1: ANALOG 2： Plays back audio files on the computer. Plays back the device connected to the COAXIAL connector - Marantz HD-AMP1 | Owner s Manual in English - Page 29
Contents Connections Playback Switching the display's brightness The display brightness can be adjusted between four levels. Switching the display off reduces a source of noise that affects sound quality, enabling higher sound quality playback. 1 Press DIMMER. 0 When the display is turned off, - Marantz HD-AMP1 | Owner s Manual in English - Page 30
Contents Connections Using as a D/A converter Playback OPT2 OPT1 POWER X COAX USB-DAC Settings Tips Appendix Digital audio signals input from an external device or computer into this unit can be converted and output as analog signals using this unit's D/A converter. (D/A converter - Marantz HD-AMP1 | Owner s Manual in English - Page 31
is switched on before installation, disconnect the USB and restart the computer. 2 Download the dedicated driver from the "Download" section of the HD-AMP1 page of the Marantz website onto your PC. 3 Unzip the downloaded file, and double-click the exe file. Front panel Display Rear panel 31 - Marantz HD-AMP1 | Owner s Manual in English - Page 32
Contents Connections Playback 4 Install the driver. A Select the language to use for the installation. B Click "OK". q w Settings Tips Appendix C The wizard menu is displayed. Click "Next". e .. Front panel Display Rear panel 32 Remote Index - Marantz HD-AMP1 | Owner s Manual in English - Page 33
Contents Connections Playback D Read the Software Licensing Agreement, and click "I accept the terms of the License Agreement". E Click "Next". Settings Tips Appendix F Click "Install" on the installation start dialog. 0 The installation starts. Do not perform any operation on the PC until - Marantz HD-AMP1 | Owner s Manual in English - Page 34
Contents Connections G Click "Next". Playback Settings Tips Appendix H When the installation is completed, click "Finish". i u .. Front panel Display Rear panel 34 Remote Index - Marantz HD-AMP1 | Owner s Manual in English - Page 35
Checking the installed driver. A Click the "Start" button and click "Control Panel" on the PC. 0 The control panel setting list is displayed. B Click the "Sound" icon. 0 The sound menu window is displayed. C Check that there is a checkmark next to "Default Device" under in "HD-AMP1" of the "Playback - Marantz HD-AMP1 | Owner s Manual in English - Page 36
TEST signal from the PC and checks the audio output from the USB-DAC function. A Select "HD-AMP1" and click "Properties". 0 The HD-AMP1 , 192000 Hz (Studio Quality)" is selected (Windows 8/8.1). D Click "Apply". E Click "Test". 0 Check that audio from this unit is output from the PC. w t e r - Marantz HD-AMP1 | Owner s Manual in English - Page 37
the PC before the dedicated driver has been installed. 0 Player software supporting the Audio Stream Input Output (ASIO) driver is required to play files with with the ASIO driver. 0 Operation may fail in some PC hardware and software configurations. 0 Please see the FAQ at www.marantz.com if you - Marantz HD-AMP1 | Owner s Manual in English - Page 38
"HDAMP1", and then select "Use this device for sound output". D Select the "HD-AMP1" format. 0 It is normally recommended to set the format to "384000.0 Hz" and "2ch-32 bit Interger". HD-AMP1 HD-AMP1 HD-AMP1 HD-AMP1 r e E Quit Audio MIDI Setup. .. Front panel Display Rear panel 38 Remote - Marantz HD-AMP1 | Owner s Manual in English - Page 39
"USBDAC". Start playback on the computer's player software. The digital audio signal that is being input is shown as follows in displayed when audio signals that are not supported by this unit are input. o Audio is not output from the computer's speakers. 0 If the computer is disconnected from - Marantz HD-AMP1 | Owner s Manual in English - Page 40
this unit are input. Settings Tips Appendix o Specifications of supported audio formats See "D/A converter" (v p. 68). NOTE 0 Do not input non-PCM signals, such as Dolby Digital, and DTS. This causes noise and could damage the speakers. 0 If the sampling frequency switches, such as from A mode - Marantz HD-AMP1 | Owner s Manual in English - Page 41
unit's USB port and enjoy music stored on the iPod. 0 For information on the iPod models that can be played back with this unit, see "Supported iPod/iPhone models" (v p. 23). . Front panel Display Rear panel 41 Remote Index - Marantz HD-AMP1 | Owner s Manual in English - Page 42
iPod" and "On-Display". By default, "From iPod", where you directly operate the iPod itself while looking at the iPod screen, is set. NOTE 0 Marantz will accept no responsibility whatsoever for any loss of iPod data. 0 Depending on the type of iPod and the software version, some functions may not - Marantz HD-AMP1 | Owner s Manual in English - Page 43
Contents Connections Playback Setting operation mode (On-Display mode) In this mode, various lists and screens during playback on the iPod are displayed on this unit. This section describes the steps up to playing back tracks on the iPod in "On-Display". 1 Press MODE. "On-Display" is displayed - Marantz HD-AMP1 | Owner s Manual in English - Page 44
Contents Connections Playback Settings Tips Appendix Performing repeat playback 1 Press REPEAT L. 0 The current repeat play mode is indicated in the display first. 0 The repeat playback mode is switched each time the button is pressed. Repeat Off (Repeat Off): Repeat One (Single-track repeat - Marantz HD-AMP1 | Owner s Manual in English - Page 45
Contents Connections Playback Playing a USB memory device 8 RANDOM 2 MODE INFO BACK POWER X iPod/USB 1/3 9 REPEAT uio p ENTER Settings Tips Appendix 0 Playing back music stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class standards can be played on this - Marantz HD-AMP1 | Owner s Manual in English - Page 46
so may damage the USB memory device, or may corrupt the files recorded on the USB memory device. 0 Note that Marantz will accept no responsibility whatsoever for any problems arising with the data on a USB memory device when using this unit in conjunction with the USB memory device. Front panel - Marantz HD-AMP1 | Owner s Manual in English - Page 47
Contents Connections Playback o USB operation Operation buttons MODE INFO o u i ENTER 8, 9 8, 9 (Press and hold) 1/3 2 REPEAT L RANDOM P Function Switch to Folder playback mode 0 Switching between "Folder" or "All" mode. Text information display 0 Text information recorded on the media is - Marantz HD-AMP1 | Owner s Manual in English - Page 48
Contents Connections Playback Performing repeat playback 1 Press REPEAT L. 0 The current repeat play mode is indicated in the display first. 0 The repeat playback mode is switched each time the button is pressed. Repeat Off (Repeat Off): Repeat One (Single-track repeat): Repeat All (All-track - Marantz HD-AMP1 | Owner s Manual in English - Page 49
Contents Connections Playback Settings Tips Appendix Playing audio from devices connected to the ANALOG connector 1 Press "ANALOG1" or "ANALOG2" to select AUDIO IN. 2 Play the component connected to this unit. ANALOG1 ANALOG2 . Front panel Display Rear panel 49 Remote Index - Marantz HD-AMP1 | Owner s Manual in English - Page 50
sound. Balance Adjust the left/right volume balance. Filter Switches the filter characteristics. H/P Gain Dimmerz1 iPodModez1z2 Set the gain of the headphone amplifier. This switches the brightness of the display. Set whether to operate the iPod from this unit or on the iPod. AutoStby (Auto - Marantz HD-AMP1 | Owner s Manual in English - Page 51
Contents Connections Playback BACK o p ENTER SETUP Settings Tips Appendix Menu operation 1 Press SETUP to select the menu to be set. Each time you press SETUP, the setting item changes. 2 Use o p to change to desired setting. 0 You can also change the setting by turning INPUT SELECTOR on the - Marantz HD-AMP1 | Owner s Manual in English - Page 52
Contents Connections Playback S. Direct Set whether to adjust the tone. Off (Default): On: Adjusting the tone. Tone is not adjusted. Tone adjustments (Bass, Treble, Balance) are disabled. 0 "S.Direct" is set to "On" when headphones are connected. Bass Adjusts the bass sound. -8dB - +8dB ( - Marantz HD-AMP1 | Owner s Manual in English - Page 53
allows users to enjoy the desired playback sound quality. The unit supports PCM and analog input signals. FIL 1 (Default): FIL 2: Offers quality. Settings Tips Appendix H/P Gain Set the gain of the headphone amplifier. Set this according to the impedance of the connected headphones. It is - Marantz HD-AMP1 | Owner s Manual in English - Page 54
Contents Connections Playback Dimmer This switches the brightness of the display. Off: Dark: Dim: Bright (Default): Turns the display off. Very low display brightness. Reduced display brightness. Normal display brightness. 0 You can also adjust the display by pressing DIMMER on the remote - Marantz HD-AMP1 | Owner s Manual in English - Page 55
Connections Playback Settings Tips Appendix Contents o Tips o Troubleshooting I want to enjoy analog output audio at back 61 I want to switch the filter to change the tone. 56 Audio from digital devices cannot be played back (Coaxial/Optical) 62 iPod cannot be played back 62 USB - Marantz HD-AMP1 | Owner s Manual in English - Page 56
Contents Connections Playback Settings Tips I want to enjoy analog output audio at higher quality 0 Press the DIMMER button to turn the display off. (v p. 29) I want to playback just the specified folder 0 Press the MODE button to set the playback mode to "Folder". (v p. 46) I want to delete the - Marantz HD-AMP1 | Owner s Manual in English - Page 57
Settings Tips Appendix Troubleshooting 1. Are the connections correct? 2. Is the set being operated as described in the owner's manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there - Marantz HD-AMP1 | Owner s Manual in English - Page 58
Contents Connections Playback Settings Tips Appendix Symptom Cause / Solution Power turns off and the 0 The USB memory device is not supported. Please use a USB memory device with an operating current standby indicator flashes in that is less than 1A. red approx. every 0.25 seconds. 0 - Marantz HD-AMP1 | Owner s Manual in English - Page 59
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Cause / Solution Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 0 Operate the remote control - Marantz HD-AMP1 | Owner s Manual in English - Page 60
is set to the minimum level. Adjust the volume to a suitable level. 0 Cancel the mute mode. 0 No sound is output from the speakers when headphones are connected. o Sound is interrupted or noise occurs Symptom Cause / Solution Sound is interrupted during 0 Do not start applications other than - Marantz HD-AMP1 | Owner s Manual in English - Page 61
is running on Windows, a dedicated driver software should be installed. This unit is displayed. 0 When digital audio signals cannot be supported by this unit are input. Check the settings on your computer or player software. 0 If the computer you use is "Mac OS", please check if the "HD-AMP1 - Marantz HD-AMP1 | Owner s Manual in English - Page 62
" is displayed. "Unsupported" is displayed. 0 "Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format from your digital device. o iPod cannot be played back Symptom Cause / Solution iPod cannot be connected or "Error - Marantz HD-AMP1 | Owner s Manual in English - Page 63
that requires power from an AC adapter, use the AC adapter that came with the drive. Files on the USB memory 0 Files of a type not supported by this unit are not displayed. device are not displayed or 0 This unit can display a file structure with up to 8 levels, up to 200 folders - Marantz HD-AMP1 | Owner s Manual in English - Page 64
Contents Connections Playback Settings Tips Appendix o File names on the iPod/USB memory device are not displayed properly Symptom Cause / Solution The file names are not displayed properly ("...", etc.). 0 Characters that cannot be displayed have been used. On this unit, characters that - Marantz HD-AMP1 | Owner s Manual in English - Page 65
WMA-TAG AAC-TAG (The title, artist, and album tag data are supported) o Compatible formats WMAz1 MP3 AACz1 Sampling frequency 32/44.1/48 kHz are not protected by copyright can be played on this unit. Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded - Marantz HD-AMP1 | Owner s Manual in English - Page 66
unit can only play music files that are not copyright protected. 0 Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in computer's settings. NOTE 0 It is not compatible with an MP3 player, digital camera, a USB device for a mobile phone, etc. 0 The unit - Marantz HD-AMP1 | Owner s Manual in English - Page 67
Contents Connections Playback About folders and files Music files recorded on a USB memory device are divided into large segments (folders) and small segments (files). Files are stored in folders, and folders can be placed for storage in a hierarchy. The unit can recognize up to 8 levels of - Marantz HD-AMP1 | Owner s Manual in English - Page 68
Contents Connections Playback D/A converter o Specifications of supported audio formats n USB-DAC DSD (2-channel) Linear PCM (2-channel) n Coaxial/Optical Linear PCM (2-channel) Sampling frequency 2.8/5.6/11.2 MHz 44.1/48/88.2/96/176.4/ 192/352.8/ - Marantz HD-AMP1 | Owner s Manual in English - Page 69
played back on iTunes, iPod or iPhone. Data compressed to approximately 60 - 70 % can be decompressed to exactly the same original data. DSD (Direct-Stream Digital) One of the audio data recording methods, it is the signal aspect used to store audio signals on a super audio CD, and is Δ-Σ modulated - Marantz HD-AMP1 | Owner s Manual in English - Page 70
format (producing a digital signal). The number of readings taken in one second is called the "sampling frequency". The larger the value, the closer the reproduced sound is to the original. Speaker impedance This is an AC resistance value, indicated in Ω (ohms). Greater power can be obtained - Marantz HD-AMP1 | Owner s Manual in English - Page 71
Contents Connections Trademark information Playback Settings Tips Appendix . "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance - Marantz HD-AMP1 | Owner s Manual in English - Page 72
Harmonic distortion: Playback Settings 35 W + 35 W (8 Ω/ohms, 20 Hz - 20 kHz, THD+N 0.1 %) 70 W + 70 W (4 Ω/ohms, 20 Hz - 20 kHz, THD+N 0.1 %) Speaker: 4-16 Ω/ohms (impedance) Compatible with headphones/stereo headphones 2 Hz - 96 kHz 2 Hz - 50 kHz (-3 dB) (DSD mode, PCM sampling frequency: 192 - Marantz HD-AMP1 | Owner s Manual in English - Page 73
Contents Connections Playback Settings 0 Analog input Input sensitivity/impedance: 0 Digital input Coaxial: Optical : USB (Front): USB (Rear): o General Power supply voltage/frequency: Power consumption (EN60065) : Power consumption in standby mode: 200 mVrms/22 kΩ/kohms 0.5 Vp-p / - Marantz HD-AMP1 | Owner s Manual in English - Page 74
Contents Connections o Dimensions (Unit : in. (mm)) Playback Settings Tips Appendix (33) 1 3/8 (53) 2 1/8 8 3/8 (210) 13 7/8 (352) 12 (303) (40) 1 5/8 (16) 3/4 12 (304) (9) 4 1/4 (107) 3 7/8 (98) 3/8 1 7/8 8 3/8 (210) 1 7/8 (47) (47) . o Weight : 12 lbs 13 oz (5.8 kg) - Marantz HD-AMP1 | Owner s Manual in English - Page 75
Contents Connections Playback Settings Index v D D/A converter function 30, 68 Display's brightness 29 DSD 68, 69 v F Front panel 9 v I Input source 28 iPod 22, 41, 44 v P PC 21 v R Random playback 44, 48 Rear panel 12 Remote control connection 24 Remote control unit 13 Repeat - Marantz HD-AMP1 | Owner s Manual in English - Page 76
- Marantz HD-AMP1 | Owner s Manual in English - Page 77
. 3520 10426 01AM Copyright ©2015 D&M Holdings Inc. All Rights Reserved. 76
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
 |
 |
.
Integrated Amplifier
HD-AMP1
Owner’s Manual
You can print more than one page of a PDF onto a single sheet of paper.
Contents
Connections
Playback
Settings
Tips
Appendix
1
Front panel
Display
Rear panel
Remote
Index