Lexmark XC9325 Quick Reference - Page 15

For two‑sided printing • Load letterhead faceup with the header toward the back of the tray. 2 Flex, fan, and align the envelope edges before loading. • Load prepunched paper faceup with the holes against the left side of the tray. Note: Make sure that the stack height is below the maximum paper fill indicator. Overfilling may cause paper jams. 6 Close the tray side door, and then insert the tray. If necessary, set the paper size and type to match the paper loaded in the tray. Note: When a finisher is installed, the images are rotated to 180° when printed. Loading the envelope tray CAUTION-TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the envelope tray. Note: To avoid jams, do not pull out trays while the printer is busy. 3 Adjust the guides to match the size of the envelope that you are loading. Note: Use the indicators on the bottom of the tray to position the guides. 15