Lexmark XC9325 Quick Reference

Lexmark XC9325 Manual

Get Lexmark XC9325 PDF manuals and user guides View all Lexmark XC9325 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark XC9325 manual content summary:

  • Lexmark XC9325 | Quick Reference - Page 1
    mail. 3 From the E‑mail Setup section, configure the settings. Notes: • For more information on the password, see the list of e‑mail service providers. • For e‑mail service providers that are not on the list, contact your provider and ask for the settings. 4 Click Save. Using the Settings menu in the
  • Lexmark XC9325 | Quick Reference - Page 2
    Credentials Device UserID Your e‑mail address Device Password Account password NetEase Mail (mail.126.com) Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the NetEase Mail home page, click Settings > POP3/SMTP/IMAP, and then enable either IMAP/SMTP
  • Lexmark XC9325 | Quick Reference - Page 3
    Device UserID Your e‑mail address Setting Device Password Value Authorization password Note: The authorization password is provided when IMAP/SMTP service or POP3/SMTP service is enabled. Outlook Live or Microsoft 365 These settings apply to outlook.com and hotmail.com e‑mail domains, and
  • Lexmark XC9325 | Quick Reference - Page 4
    Use Device SMTP Credentials Your e‑mail address Device Password Independent password Note: The independent password is provided when IMAP/SMTP service or POP3/SMTP service is enabled. Yahoo! Mail Setting Value Primary SMTP Gateway smtp.mail.yahoo.com Primary SMTP 587 Gateway Port Use SSL
  • Lexmark XC9325 | Quick Reference - Page 5
    up the fax function using fax server Notes: • This feature lets you send fax messages to a fax service provider that supports e‑mail receiving. • This feature supports outgoing fax messages only. To support fax receive, make sure that you have a device‑based fax, such as analog fax, etherFAX, or Fax
  • Lexmark XC9325 | Quick Reference - Page 6
    that both devices are connected to the same subnet. 6 • This application is supported only in some Apple devices. 1 From your mobile device, select a document a mobile device using Wi‑Fi Direct® Wi‑Fi Direct® is a printing service that lets you print to any Wi‑Fi Direct‑ready printer. Note: Make
  • Lexmark XC9325 | Quick Reference - Page 7
    7 From the printer home screen, release the print job. • For confidential print jobs, touch Held jobs > select your user name > Confidential > enter the PIN > select the print job > configure the settings > Print. • For other print jobs, touch Held jobs > select your user name > select the print job >
  • Lexmark XC9325 | Quick Reference - Page 8
    4 Shake the toner cartridge to redistribute the toner. 6 Unlock the waste toner bottle. 7 Remove the waste toner bottle. 5 Insert the new toner cartridge. Note: To avoid spilling the toner, place the bottle in an upright position. 8
  • Lexmark XC9325 | Quick Reference - Page 9
    8 Remove the printhead wiper, and then clean the printhead lenses. 9 Insert the printhead wiper back into place. 9
  • Lexmark XC9325 | Quick Reference - Page 10
    other trays closed until needed. 1 Pull out the tray. Note: To avoid jams, do not pull out trays while the printer is busy. 2 Adjust the guides to match the size of the paper that you are loading. Note: Use the indicators on the bottom of the tray to position the
  • Lexmark XC9325 | Quick Reference - Page 11
    3 Flex, fan, and align the paper edges before loading. For one‑sided, short‑edge printing • Load letterhead faceup with the header toward the left side of the tray. • Load prepunched paper facedown with the holes against the right side of the tray. 4 Load the paper stack with the printable side
  • Lexmark XC9325 | Quick Reference - Page 12
    not slide paper into the tray. • Make sure that the side guides fit snugly against the paper. • Make sure that the stack printing • Load letterhead faceup with the header toward the back of the tray. 2 Adjust the guides to match the size of the paper that you are loading. 5 Insert the tray. If
  • Lexmark XC9325 | Quick Reference - Page 13
    For two‑sided printing • Load letterhead facedown with the header toward the back of the tray. • Load hole-punched paper facedown with the holes against the right side of the tray. Notes: • Do not slide paper into the tray. • Make sure that the stack height is below the maximum paper fill indicator.
  • Lexmark XC9325 | Quick Reference - Page 14
    2 Adjust the guide at the back of the tray. Do the same at the front of the tray. 3 Adjust the lever on the tray side door. For one‑
  • Lexmark XC9325 | Quick Reference - Page 15
    trays closed until needed. 1 Pull out the envelope tray. Note: To avoid jams, do not pull out trays while the printer is busy. 3 Adjust the guides to match the size of the envelope that you are loading. Note: Use the indicators on the bottom of the tray to position the
  • Lexmark XC9325 | Quick Reference - Page 16
    Notes: • Make sure that the side guides fit snugly against the envelopes. • Make sure that the stack height is below the maximum fill indicator. Overfilling may cause jams. Loading the multipurpose feeder 1
  • Lexmark XC9325 | Quick Reference - Page 17
    to the left side of the paper. 3 Flex, fan, and align the paper edges before loading. 4 Load the paper. Note: Make sure that the side guides fit snugly against the paper. For long-edge feed: • For one-sided printing, load letterhead facedown with the header toward the rear of the printer. Load
  • Lexmark XC9325 | Quick Reference - Page 18
    CD that came with your printer. • From our website or the place where you purchased the printer. 2 Run the installer, and then follow the instructions on the computer screen. Installing the fax driver 1 Go to our website or the place where you purchased the printer, and then obtain the installer
  • Lexmark XC9325 | Quick Reference - Page 19
    Adding printers to a computer Before you begin, do one of the following: • Connect the printer and the computer to the same network. For more information on connecting the printer to a network, see "Connecting the printer to a Wi‑Fi network" on page 19. • Connect the computer to the printer. For
  • Lexmark XC9325 | Quick Reference - Page 20
    ‑Fi Direct has been configured. For more information, see "Configuring Wi‑Fi Direct" on page 19. Connecting using Wi‑Fi Direct Note: These instructions apply only to Android mobile devices. 1 From the mobile device, go to the settings menu. 2 Enable Wi‑Fi, and then tap Wi‑Fi Direct. 3 Select
  • Lexmark XC9325 | Quick Reference - Page 21
    Jam locations 6 Staple, hole punch finisher 7 Standard tray 8 2000‑sheet tray 9 Staple finisher 10 Optional trays Paper jam in the standard tray 1 Open door A. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool
  • Lexmark XC9325 | Quick Reference - Page 22
    4 Pull out the optional 520‑sheet tray or 2000‑sheet tandem tray. 6 In tandem trays, pull out handle C, and then open the inner cover. 5 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 7 Remove the jammed paper. Note: Make sure that all paper fragments are removed.
  • Lexmark XC9325 | Quick Reference - Page 23
    Paper jam in the 2000‑sheet tray 1 Slide the tray to the left. Note: Make sure that all paper fragments are removed. 8 Close the cover, and then insert handle C. 9 Insert the tray. Paper jam in the multipurpose feeder Remove the jammed paper. Note: Make sure that all paper fragments are removed.
  • Lexmark XC9325 | Quick Reference - Page 24
    • Duplex unit • Door C 2 Remove the jammed paper from any of the following areas: Note: Make sure that all paper fragments are removed. • Fuser area 2 Open door C, and then remove the jammed paper. Note: Make sure that all paper fragments are removed. 3 Close the door. Paper jam in the standard
  • Lexmark XC9325 | Quick Reference - Page 25
    2 Open the ADF cover. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. Paper jam in the automatic document feeder 1 Remove all original documents from the ADF tray. 3 Remove the jammed
  • Lexmark XC9325 | Quick Reference - Page 26
    3 Close door A1, and then close door A. 4 Open the finisher top cover, and then remove the jammed paper. Note: Make sure that all paper fragments are removed. 5 Close the cover. 6 Open the finisher front cover, turn the knob, and then remove the jammed paper. Note: Make sure that all paper fragments
  • Lexmark XC9325 | Quick Reference - Page 27
    CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. 9 Open door C, and then remove the jammed paper. Note: Make sure that all paper fragments are removed. 2 Open door A1, and then remove the
  • Lexmark XC9325 | Quick Reference - Page 28
    6 Pull the lever on the staple, hole punch finisher and then lift the cover. 5 Close the cover. 7 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 8 Close the cover. 28
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Quick Reference
Copy
Making copies
1
Load an original document into the ADF tray or on the scanner
glass.
Note:
To avoid a cropped image, make sure that the original
document and output have the same paper size.
2
From the home screen, touch
Copy
, and then specify the
number of copies.
If necessary, adjust the copy settings.
3
Copy the document.
Note:
To make a quick copy, from the home screen, touch
.
Copying on both sides of the paper
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Copy
>
Sides
.
3
Touch
1 sided to 2 sided
or
2 sided to 2 sided
.
4
Copy the document.
Copying multiple pages onto a single
sheet
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Copy
>
Pages per Side
.
3
Adjust the settings.
4
Copy the document.
E-mail
Configuring the e
‑
mail SMTP settings
Configure the Simple Mail Transfer Protocol (SMTP) settings to
send a scanned document through e-mail. The settings vary with
each e
‑
mail service provider.
Before you begin, make sure that the printer is connected to a
network and that the network is connected to the Internet.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in
the address field.
Notes:
•
View the printer IP address on the printer home screen.
The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable
it to load the web page correctly.
2
Click
Settings
>
E
‑
mail
.
3
From the E
‑
mail Setup section, configure the settings.
Notes:
•
For more information on the password, see the list of
e
‑
mail service providers
.
•
For e
‑
mail service providers that are not on the list,
contact your provider and ask for the settings.
4
Click
Save
.
Using the Settings menu in the printer
1
From the home screen, touch
Settings
>
E
‑
mail
>
E
‑
mail Setup
.
2
Configure the settings.
Notes:
•
For more information on the password, see the list of
e
‑
mail service providers
.
•
For e
‑
mail service providers that are not on the list,
contact your provider and ask for the settings.
E
‑
mail service providers
•
AOL Mail
•
Comcast Mail
•
Gmail
•
iCloud Mail
•
Mail.com
•
NetEase Mail (mail.126.com)
•
NetEase Mail (mail.163.com)
•
NetEase Mail (mail.yeah.net)
•
Outlook Live or Microsoft 365
•
QQ Mail
•
Sina Mail
•
Sohu Mail
•
Yahoo! Mail
•
Zoho Mail
Notes:
•
If you encounter errors using the settings provided, then
contact your e
‑
mail service provider.
•
For e
‑
mail service providers that are not on the list, contact
your provider.
AOL Mail
Setting
Value
Primary SMTP
Gateway
smtp.aol.com
Primary SMTP
Gateway Port
587
Use SSL/TLS
Required
Require Trusted
Certificate
Disabled
Reply Address
Your e
‑
mail address
SMTP Server
Authentication
Login / Plain
Device
‑
Initiated E
‑
mail
Use Device SMTP Credentials
Device UserID
Your e
‑
mail address
Device Password
App password
Note:
To create an app password,
go to the
AOL Account Security
page, log in to your account, and
then click
Generate app password
.
1