Lantronix EDS3000PR User Guide - Page 51
To Specify a Clock-Setting Method, Using Web Manager, Using the CLI
View all Lantronix EDS3000PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
9: Administration Clock Settings Time NTP Server Time Zone Description If Manual is selected, enter the time using the Hour, Minute (Min) and Second (Sec) drop-down menus that become available. If SNTP is selected, the clock will keep time synchronized with the NTP Server by default. Enter an alternative NTP server if you wish to use an address other than the default. Select the desired Time Zone from the drop-down menu based on geographic location. The time zones listed are in Universal Time Coordinated (UTC), formerly known as Greenwich Mean Time (GMT). Syslog and other applications may use UTC. The UTC Offset of the form HHMM (H = hour, M = minute) is applied to the UTC time to get the local time. The EDS3000 device will make seasonal time changes required for Daylight Savings Time. To Specify a Clock-Setting Method Using Web Manager To view or configure basic Clock settings, on the Administration page, click Clock. Using the CLI To enter Clock command level: enable > config > clock Using XMLInclude in your file: ConsoleFlow The EDS3000 device come integrated with the ConsoleFlow cloud platform to allow for the remote management of devices. To set up the ConsoleFlow client, you need to configure the following settings: ConsoleFlow Client - To connect to the ConsoleFlow cloud platform. Line Settings (number of lines varies by EDS3000 model) - To enable remote management and data access to your application or device attached on the serial line. Configure ConsoleFlow Client This page displays the configuration and status for ConsoleFlow client. ConsoleFlow Client State Device ID Device Key Device Name Device Description Table 9-13 ConsoleFlow Client Configuration Description Click to enable or disable the ConsoleFlow client. Read only. Displays the gateway's Device ID. Device ID may be provisioned through Lantronix Provisioning Manager. Note: Device ID can only be provisioned once. It will persist across resets. Read only. Shows whether the gateway's Device Key has been configured. Device Key may be configured through Lantronix Provisioning Manager. Enter the ConsoleFlow Device Name. Enter the ConsoleFlow Device Description. EDS3000 Device Server User Guide 51