Lantronix EDS3000PR User Guide - Page 41
ICMP Settings, To Con ICMP Protocol Stack Settings, Using Web Manager, Using the CLI, Using XML
View all Lantronix EDS3000PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6: Network Settings ICMP Settings This page contains lower level ICMP Network Stack specific configuration items. ICMIP Settings State Table 6-2 ICMP Protocol Stack Settings Description The State selection is used to turn on/off processing of ICMP messages. This includes both incoming and outgoing messages. Choose Enabled or Disabled. To Configure ICMP Protocol Stack Settings Using Web Manager To configure ICMP protocol settings, on the Network page, click Protocol Stack > ICMP. Using the CLI To enter the command level: enable > config > icmp Using XML Include in your file: ARP Settings This page contains lower level Address Resolution Protocol (ARP) network stack specific configuration items.The ARP cache can be manipulated manually by adding new entries and deleting existing ones. Added entries are static and for test purposes only. ARP Settings IP Address MAC Address Interface Add (button) Clear Remove Table 6-3 ARP Protocol Stack Settings Description Enter the IP address to add the ARP cache. Enter the MAC address to add to the ARP cache. Select the type of interface if adding to the ARP cache. Click this button to add a new entry (after entering the IP address, MAC address and Interface info for the new entry above.) Click the Clear link above all listed addresses to remove all the addresses. Click the Remove link beside a specific address to remove it. To Configure ARP Network Stack Settings Using Web Manager To configure ARP protocol settings, on the Network page, click Protocol Stack > ARP. Using the CLI To enter the command level: enable > config > arp Using XML Include in your file: EDS3000 Device Server User Guide 41