Home » Lantronix Manuals » Electronics Accessories » Lantronix EDS3000PR » Manual Viewer

Lantronix EDS3000PR User Guide - Page 26

For EDS3000PS, Power Input, Housing, Installing the EDS3000PR Devices, Finding a Suitable Location

View all Lantronix EDS3000PR manuals

Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

3: Installation of EDS3000PR/EDS3000PS For EDS3000PS The reset button is on the back of the EDS3000PS device to the left of the Power connector. Pressing this button for 2 to 3 seconds reboots the EDS3000PS device and terminates all data activity occurring on the serial and Ethernet ports. Power Input  100-240 VAC, 50 to 60 Hz IEC-type cord  Typical: 10 Watts  Maximum: 20 Watts Housing For EDS3000PR  Case: Metal enclosure with removable wall mounts  Dimensions: (L x W x H): 304.37 x 480.82 x 42.18 mm (11.98 x 18.93 x 1.66 in)  Weight: 4.20 kg (9.25 lb) maximum, depending upon model For EDS3000PS  Dimensions: (L x W x H): 12.8 x 22.7 x 6 cm (5.02 x 8.92 x 2.36 in.)  Weight: 0.616 kg (1.36lbs) Installing the EDS3000PR Devices Finding a Suitable Location You can install the EDS3000PR device either in an EIA-standard 19-inch rack (1U tall) or as a desktop unit. If using AC power, avoid outlets controlled by a wall switch. Connecting the EDS3000PR Devices 1. Power off the serial device that will be connected to the EDS3000PR devices. 2. Attach a serial cable between the EDS3000PR device and your serial device. For a list of cables and adapters you can use with the EDS3000PR device, refer to Appendix D: Lantronix Cables and Adapters. 3. Connect an Ethernet cable between the EDS3000PR device Ethernet port and your Ethernet network. 4. Insert the power cord into the back of the EDS3000PR device. Plug the other end into an AC wall outlet. After power-up, the self-test begins. 5. Power up the serial devices. EDS3000 Device Server User Guide 26

Section	Page
EDS3000 Device Server User Guide	1
Revision History	3
1: About This Guide	12
Chapter and Appendix Summaries	12
Additional Documentation	13
2: Introduction	14
EDS3008PR, EDS3016PR, and EDS3032PR Overview	14
EDS3008PS and EDS3016PS Overview	15
Key Features	16
Applications	16
Protocol Support	17
Additional Features	18
Modem Emulation	18
Web-Based Configuration and Troubleshooting	18
Command-Line Interface (CLI)	18
SNMP Management	18
XML-Based Architecture and Device Control	18
Really Simple Syndication (RSS)	18
Enterprise-Grade Security	18
SSH and SSL are able to do the following:	19
Terminal Server/Device Management	19
Troubleshooting Capabilities	19
Configuration Methods	19
Addresses and Port Numbers	20
Hardware Address	20
IP Address	20
Port Numbers	20
Product Information Label	21
3: Installation of EDS3000PR/EDS3000PS	22
Package Contents	22
User-Supplied Items	22
Identifying Hardware Components	23
Serial Ports	24
Console Port	24
Ethernet Port	24
LEDs	24
For EDS3000PS	25
Reset Button	25
For EDS3000PR	25
For EDS3000PS	26
Power Input	26
Housing	26
For EDS3000PR	26
For EDS3000PS	26
Installing the EDS3000PR Devices	26
Finding a Suitable Location	26
Connecting the EDS3000PR Devices	26
Installing the EDS3000PS Devices	27
Finding a Suitable Location	27
Connecting the EDS3000PS Devices	27
4: Using Lantronix Provisioning Manager	29
Installing Lantronix Provisioning Manager	29
Accessing the EDS3000 Device Using Lantronix Provisioning Manager	29
5: Configuration Using Web Manager	30
Accessing Web Manager	30
To access Web Manager, perform the following steps:	30
Device Status Page	30
Web Manager Page Components	32
Web Manager pages have these sections:	32
Navigating the Web Manager	33
6: Network Settings	36
Wired Network (eth0)	36
Interface Status and Configuration	36
To Configure Network Interface Settings	39
Using Web Manager	39
Using the CLI	39
Using XML	39
Link Status and Configuration	39
To Configure Wired Network (eth0) Link Settings	40
Using Web Manager	40
Using the CLI	40
Using XML	40
Protocol Stack	40
IP Settings	40
To Configure IP Protocol Stack Settings	40
Using Web Manager	40
Using the CLI	40
Using XML	40
ICMP Settings	41
To Configure ICMP Protocol Stack Settings	41
Using Web Manager	41
Using the CLI	41
Using XML	41
ARP Settings	41
To Configure ARP Network Stack Settings	41
Using Web Manager	41
Using the CLI	41
Using XML	41
7: Filesystem	42
File Transfer and Modification	43
To View, Transfer, or Modify Filesystem Files	43
Using Web Manager	43
Using the CLI	43
Using XML	43
8: Diagnostics	44
DNS	44
Accessing the DNS Settings	44
Using Web Manager	44
Using CLI	45
Using XML	45
Hardware	45
To View Hardware Information	45
Using Web Manager	45
Using the CLI	45
Using XML	45
IP Sockets	45
To View the List of IP Sockets	45
Using Web Manager	45
Using the CLI	45
Using XML	45
Log	45
To Configure the Diagnostic Log Output	46
Using Web Manager	46
Using the CLI	46
Using XML	46
Memory	46
To View Memory Usage	46
Using Web Manager	46
Using the CLI	46
Using XML	46
Ping	46
To Ping a Remote Host	47
Using Web Manager	47
Using the CLI	47
Using XML	47
Processes	47
To View Process Information	47
Using Web Manager	47
Using the CLI	47
Using XML	47
Routes	47
Using Web Manager	47
Using CLI	47
Using XML	47
Threads	48
To View Thread Information	48
Using Web Manager	48
Using the CLI	48
Using XML	48
Traceroute	48
To Perform a Traceroute	48
Using Web Manager	48
Using the CLI	48
Using XML	48
9: Administration	49
CLI	49
CLI Status and Configuration	49
To View and Configure Basic CLI Settings	50
Using Web Manager	50
Using the CLI	50
Using XML	50
Clock	50
To Specify a Clock-Setting Method	51
Using Web Manager	51
Using the CLI	51
Using XMLInclude in your file: <configgroup name=\	51
ConsoleFlow	51
Configure ConsoleFlow Client	51
Configure ConsoleFlow Line	53
To Configure ConsoleFlow	53
Using Web Manager	53
Using the CLI	53
Using XML	53
Discovery	53
To Configure Discovery	54
Using Web Manager	54
Using the CLI	54
Using XML	54
Email	54
To View, Configure and Send Email	55
Using Web Manager	55
Using the CLI	55
Using XML	55
FTP	55
To Configure FTP Settings	55
Using Web Manager	55
Using the CLI	56
Using XML	56
Host	56
To Configure Host Settings	56
Using Web Manager	56
Using the CLI	56
Using XML	56
HTTP	56
Interface Status, Configuration and Authentication	57
To View or Configure HTTP	58
Using Web Manager	58
Using the CLI	58
Using XML	58
To Configure HTTP Authentication	59
Using Web Manager	59
Using the CLI	59
Using XML	59
Line	59
Line Status and Configuration	59
To View and Configure Line Configuration and Command Mode	61
Using Web Manager	61
Using the CLI	61
Using XML	61
RSS	61
To Configure RSS Settings	62
Using Web Manager	62
Using the CLI	62
Using XML	62
SMTP	62
To Configure SMTP Settings	62
Using Web Manager	62
Using the CLI	62
Using XML	63
SNMP	63
To Configure SNMP Settings	64
Using Web Manager	64
Using the CLI	64
Using XML	64
SSH	64
SSH Server: Host Keys	64
SSH Server: Authorized Users	65
SSH Client: Known Hosts	65
SSH Client: Users	66
To Configure SSH Settings	67
Using Web Manager	67
Using the CLI	67
Using XML	67
SSL	68
Credentials	68
To Create a New Credential	68
Using Web Manager	68
Using the CLI	68
Using XML	68
To Delete a Credential	68
Using Web Manager	68
Using CLI	68
Using XML	69
To Configure an SSL Credential to Use an Uploaded Certificate	70
To Configure an SSL Credential to Use a Self-Signed Certificate	70
Trusted Authorities	70
To Upload an Authority Certificate	71
To upload a trusted authority certificate:	71
CSR (Certificate Signing Request)	71
Syslog	72
To Configure Syslog Settings	73
Using Web Manager	73
Using CLI	73
Using XML	73
System	73
To access System settings	74
Using Web Manager	74
Using the CLI	74
Using XML	74
Terminal	75
To Configure the Terminal Network Connection	75
Using Web Manager	75
Using the CLI	75
Using XML	75
To Configure the Terminal Line	76
Using Web Manager	76
Using the CLI	76
Using XML	76
Tunnel	76
Tunnel Statistics	76
To View Tunnel Statistics	76
Using Web Manager	76
Using the CLI	76
Using XML	76
Serial Settings	76
To Configure Tunnel Serial Settings	77
Using Web Manager	77
Using the CLI	77
Using XML	77
Packing Mode	77
To Configure Tunnel Packing Mode Settings	78
Using Web Manager	78
Using the CLI	78
Using XML	78
Accept Mode	78
To Configure Tunnel Accept Mode Settings	81
Using Web Manager	81
Using the CLI	81
Using XML	81
Connect Mode	81
To Configure Tunnel Connect Mode Settings	84
Using Web Manager	84
Using the CLI	84
Using XML	84
Connecting Multiple Hosts	84
Host List Promotion	84
To promote a specific Host:	84
Disconnect Mode	84
To Configure Tunnel Disconnect Mode Settings	85
Using Web Manager	85
Using the CLI	85
Using XML	85
Modem Emulation	85
To Configure Tunnel Modem Emulation Settings	86
Using Web Manager	86
Using the CLI	86
Using XML	86
User Management	87
To Configure User Management	88
Using the CLI	88
Using XML	89
XML	89
To Export Configuration	89
Using Web Manager	89
Using the CLI	90
Using XML	90
To Export Status	90
Using Web Manager	90
Using the CLI	90
Using XML	91
To Import Configuration	91
Using Web Manager	91
Using the CLI	91
Using XML	91
Appendix A: Technical Support	93
Appendix B: Binary to Hexadecimal Conversions	94
Converting Binary to Hexadecimal	94
Conversion Table	94
Scientific Calculator	95
Appendix C: Compliance	96
EU Declaration of Conformity for EDS3008PR, 3016PR, 3032PR	96
EU Declaration of Conformity for EDS3008PS, 3016PS	97
Emissions and Immunity	98
Safety	98
RoHS, REACH and WEEE Compliance Statement	98
Lithium Battery Notice	98
Installationsanweisungen	99
Rackmontage nur für EDS3000PR	99
Energiezufuhr	99
Erdung	99
Installation Instructions	99
Rack Mounting for EDS3000PR only	99
Input Supply	99
Grounding	99