Kyocera ECOSYS P2235dn Kyocera Command Center RX User Guide Rev-9.2016.6 - Page 95
Acquisition of User Information, Obtain Network User Property
View all Kyocera ECOSYS P2235dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Management Settings Host Name: Enter the host name or IP address of the network authentication server. If you use the host name, you must first specify the DNS server information. Port Number: Enter the port number of the network authentication server. Server Type: Select the server type from the drop-down list. When you use ID Card, select Ext.. Default Domain: Click Domain List button to open the Domain List page. Enter the domain name and click Submit button. If you have entered the several domain names, you can select it from the drop-down list. 2. Configure the PIN Login Settings. You can configure this setting if you select Ext. as a server type. PIN Login: Select On or Off. 3. Configure the Network User Settings. Obtain Network User Property: Select On or Off. 4. Click Server Settings button to configure the server settings. LDAP: Confirm that LDAP is set to On. If the setting is Off, switch to On in the Protocol Settings page under Network Settings. LDAP Server Name: Enter the LDAP server name or IP address. LDAP Port Number: Enter the LDAP port number. Search Timeout: Enter the search timeout in seconds. LDAP Security: Configure this setting in the Protocol Settings page under Network Settings. 5. Configure the Acquisition of User Information. Enter Name 1, Name 2, or Email Address. 6. Click Submit button. 7. If you configure the Group Authorization Settings, select On in Group Authorization, and click Group List button.Select the group for authorization, click Submit button. 4. You can configure settings for Group Authorization Settings. Group Authorization Switches Group Authorization On or Off. Group List Click Group List button to open the Group List page. Click a group name to authorize from the Group List. The Property page opens. 5. You can configure settings for Group Property. Group ID Change the group ID as desired. Group Name Change the group name as desired. Access Level Select Administrator or User as an access level. 6. You can configure settings for Authorization. Copy Restriction Select Off or Reject Usage as desired. User Guide 91