Kyocera ECOSYS P2235dn Kyocera Command Center RX User Guide Rev-9.2016.6 - Page 77
Network Settings, User Guide, The status
View all Kyocera ECOSYS P2235dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Network Settings Select a method for SMTP Security (User #) from Off, STARTTLS, and SSL/TLS on the drop-down list. To enable this protocol, activate SSL on the Network Security Settings page under Security Settings. 3. FTP Client (Transmission): FTP (File Transfer Protocol) is a standard network protocol used to transfer files from one host or to another host over a TCP-based network, such as the Internet. To enables the FTP protocol, turn this item On. Port Number: Enter the port number. Typically, this should be 21. By selecting On on FTP Encryption TX, the file transmission is implemented with the algorithms configured in the following. To enable this protocol, activate SSL on the Network Security Settings page under Security Settings. 4. SMB: SMB is a network protocol applied to shared access to files, printers, serial ports, etc.. To enables the SMB protocol, turn this item On. Port Number: Enter the port number. Typically, this should be 445. 5. i-FAX (SMTP and POP3): To enable i-FAX, turn this item On. To configure i-FAX, go to the FAX/i-FAX Settings page under Function Settings. 6. WSD Scan: WSD is a new networking protocol provided with Windows Vista for discovery of the printing systems and data exchange for printing. To enable the WSD protocol, turn this item On. 7. DSM Scan: DSM allows the distributed scan management. The system administrator can use DSM to manage scan services over organizations which have a large number of users. To enable DSM scan, turn this item On. To configure DSM scan, go to the DSM Scan Settings page under Function Settings. To enable this item, select Network Authentication on the Authentication Settings page under Management Settings. Select a method for LDAP Security (DSM Scan) from Off, STARTTLS, or SSL/ TLS on the drop-down list. To enable this item, activate SSL on the Network Security Settings page under Security Settings. 8. eSCL: eSCL is a network protocol used for remote scanning from Mac OS X computer. To enables the eSCL protocol, turn this item On. Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the available network for eSCL protocol. 9. eSCL over SSL: A certificate can be added for communication using the eSCL protocol. To enable the eSCL over SSL, turn this item On. To enable this protocol, select On on SSL of the Network Security Settings page. Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the available network for eSCL over SSL. eSCL over SSL Certificate: The status of eSCL over SSL Certificate is shown. To make advanced settings, click Settings button and select a certificate. Click Submit button to finalize settings. Configure the device certificate on the Certificates page of Security Settings. This Certificate can be used in common with ThinPrint, HTTPS/IPP over SSL, Enhanced WSD over SSL, eSCL over SSL, and so on. Other Protocols This section allows to configure other network protocols. This section includes the following items for configuration: 1. SNMPv1/v2c: The SNMP protocol provides and transfers management information within the network environment. Should an error occur such as Add Paper, the printing system automatically generates a trap, an error message sent to up to two predetermined trap recipients. To enable the SNMPv1/v2 protocol, turn this item On. To configure the SNMPv1/v2 protocol, go to the SNMP Settings page under Management Settings. Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the available network for SNMP protocol. 2. SNMPv3: The SNMP protocol provides and transfers management information within the network environment. To enable the SNMPv3 protocol, turn this item On. User Guide 73