Invacare TDXSP2 Owners Manual 2 - Page 69
DANGER, Risk of Injury, Damage or Death, Inspect/Adjust Daily, Inspect/Adjust Weekly, Inspect/Adjust
View all Invacare TDXSP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
DANGER! Risk of Injury, Damage or Death Overinflation of tires may cause tires to explode. - Inflate tire to the proper tire pressure (P.S.I. / kilopascals) listed on the side wall of the tire. - Only use wheelchair with tires at proper pressure. - The wheels and tires should be checked periodically for cracks and wear and should be replaced if necessary. 7.2.1 Inspect/Adjust Daily q Check that all switches (push buttons/toggles) that operate your power positioning system are functioning properly. q Check that batteries are charged. (refer to the base wheelchair user manual for battery charging and battery care information). 7.2.2 Inspect/Adjust Weekly q Inspect all fasteners. q Inspect TRRO fasteners and hardware. q Ensure proper operation of powered functions (Example: drive, seating and legrests). 7.2.3 Inspect/Adjust Monthly q Clean upholstery and armrests. q Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. 60101832-A Maintenance q Check that cables are routed and secured properly to ensure that cables do NOT become entangled and damaged during normal operation of seating system. q Check cables and wires for damage. q Make sure all electrical connections are secure. q Inspect mounting hardware (seating system to base). q Check limit switch settings. q Make sure drive lock-out operates properly. 7.2.4 Inspect/Adjust Periodically • Inspect all operator (user/attendant) adjustable fasteners including the back pan, back cane and angle adjustment fasteners, and the arm support, flip back and height adjustment fasteners. Ensure fasteners are securely tightened. • Inspect TRRO fasteners and hardware. • Ensure clothing guards are secure. • Ensure arms are secure but easy to release and adjustment levers engage properly. • Ensure adjustable height arms operate and lock securely. • Ensure upholstery does not have any rips or tears. • Armrest pad sits flush against arm tube. • Inspect foam handgrips for damage. If damaged, have them replaced by a qualified technician. • Check center mount front riggings for loose fasteners. Replace /tighten if necessary. • Check that all labels are present and legible. Replace if necessary. • Make sure drive lock out operates properly. • Make sure elevate systems drive with reduced speed when seat is in elevated position. • Make sure tilt mechanism and tilt tracks are clean. 69