Invacare TDXSP2 Owners Manual 2 - Page 29
Tilt/Recline Drive Lockout DLO Limit, Reduced Drive Speed RDS Limit, Maximum Back Angle Limit, Tilt/
View all Invacare TDXSP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Tilt/Recline Drive Lockout (DLO) Limit All tilt and recline seating systems are equipped with a drive lockout (DLO) limit to prevent the wheelchair from being driven when the seating system is tilted or reclined beyond a pre-determined safe total angle. The total angle can be any combination of seat angle, backrest angle and/or surface angle. Drive lockout only responds when you adjust angles in standstill. The DLO limit is set to a maximum of 30° (120°-90°). Components • the seating system is raised to a pre-determined height (4 in [100 mm]) beyond the home (fully retracted) position, or • the seating system is tilted outside of the pre-determined angle range (110°-90°). Fig. 3-9 Angle measured from vertical Reduced Drive Speed (RDS) Limit Seating systems that are configured with a scissor lift module or the tilt module are configured/programmed with a Reduced Drive Speed limit. The limit utilizes a microswitch to trigger the seating system into reduced speed drive as soon as: 60101832-A Fig. 3-10 Home Position (Left), RDS Limit (Right) Maximum Back Angle Limit The maximum tilt limit establishes the maximum back angle for the seating system at tilt/recline combined. The function of this limit is to prevent the back angle from extending beyond a maximum pre-set angle. Ultra Low Maxx seating systems are typically preset at the factory to the maximum allowable angle and do not require any further adjustment unless the maximum angle needs to be decreased (see hazard statement below). Tilt/Recline: Maximum Tilt/Recline Limit = 168° 29