Invacare TDXSP2 Owners Manual 2 - Page 51
Pivot Plus Legrests
View all Invacare TDXSP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Calf pads may be adjusted independently on their respective mounting bracket using the mounting screws at the rear of the calf pads. Calf pads may be adjusted (for depth, height & angle) to achieve a variety of different configurations. The independent pad adjustments provide optimal positioning and comfort for end users - sample configurations are illustrated below. Calf pad adjustment - sample configurations Setup 4.13 Pivot Plus Legrests 4.13.1 Swing Away Pivot Plus Legrests The Pivot Plus legrests use a user friendly lever handle that locks and unlocks the legrest, allowing the legrest pin to pivot/rotate about the legrest receiver. Centered Extended Position (maximum) Fig. 4-46 Lowered Offset Raised Offset Angled • 4.8 mm Allen key 1. Fold the calf pad forward in order to access the bolts. 2. Loosen the bolts and remove them if necessary. 3. Adjust the calf pad to the required height and width. 4. Retighten the bolts. 5. Fold the calf pad back. 60101832-A 51