Invacare CXE Owners Manual - Page 62

Installing Rigid Side Guards

Get Invacare CXE PDF manuals and user guides View all Invacare CXE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

SECTION 6-ARMS Installing Rigid Side Guards NOTE: For this procedure, refer to FIGURE 6.22. 1. Position the unthreaded half clamp on the inside of the wheelchair frame. 2. Position the threaded half clamp on the outside of the wheelchair frame. 3. Install the washer and socket screw through the two half clamps and loosely tighten. 4. Slide the rigid side guard into the slot on the threaded half clamp. 5. Determine the necessary position for the rigid side guard. 6. Securely tighten the two half clamps together with the socket screw. Unthreaded Half Clamp Washer Socket Screw Rigid Side Guard Threaded Half Clamp Wheelchair Frame FIGURE 6.22 Installing Rigid Side Guards Compass™XE and Allegro® 62 Part No 1127114

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
SECTION 6—ARMS
Compass™XE
and Allegro®
62
Part No 1127114
Installing Rigid Side Guards
NOTE: For this procedure, refer to FIGURE 6.22.
1.
Position the unthreaded half clamp on the inside of the wheelchair frame.
2.
Position the threaded half clamp on the outside of the wheelchair frame.
3.
Install the washer and socket screw through the two half clamps and loosely tighten.
4.
Slide the rigid side guard into the slot on the threaded half clamp.
5.
Determine the necessary position for the rigid side guard.
6.
Securely tighten the two half clamps together with the socket screw.
FIGURE 6.22
Installing Rigid Side Guards
Rigid Side Guard
Threaded Half Clamp
Unthreaded Half Clamp
Washer
Socket Screw
Wheelchair Frame