Intermec CV30 CV30 Fixed Mount Computer User's Manual - Page 94
Cleaning the Screen, To clean boot the CV30, To clean the screen
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 5 - Troubleshooting and Maintaining the CV30 To clean boot the CV30 1 Using a small pointed device (such as the end of the stylus) or your finger, press the Reset switch on the top of the CV30 at the same time as you press the Power button. Do not use force or a sharp object when pressing the reset switch. You may damage the reset switch. Reset 802.11 The blue light on the CV30 blinks once and the CV30 starts the booting sequence. 2 Reload any custom applications that may have been erased during the clean boot and reset the time and date. Cleaning the Screen To keep the CV30 in good working order, you may need to clean the screen whenever necessary depending on the environment in which you use the computer. To clean the CV30, use a solution of ammonia and water. To clean the screen 1 Disconnect the CV30 from the power supply. 2 Dip a clean towel or rag in the ammonia solution and wring out the excess. Wipe off the screen. Do not allow any abrasive material to touch these surfaces. 3 Wipe dry. 84 CV30 Fixed Mount Computer User's Manual