Intermec CV30 CV30 Fixed Mount Computer User's Manual - Page 85
Troubleshooting the CV30, Problems While Operating the CV30
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 5 - Troubleshooting and Maintaining the CV30 Troubleshooting the CV30 If you send the CV30 in for service, it is your responsibility to save the computer data and configuration. Intermec is responsible only for ensuring that the hardware matches the original configuration when repairing or replacing the computer. Problems While Operating the CV30 Problem Solution You press Power and nothing happens. • Make sure the brightness is not set all the way to the darkest or lightest setting. Press and hold the Brightness button until you reach the desired contrast level. • Make sure the backlight is on by pressing the Brightness button. • Make sure you are connected to a power supply. • Reset the CV30. For help, see "Resetting the CV30" on page 9. The Battery light is on. The backup battery needs to be replaced immediately. The CV30 appears to be locked • Press Power to turn off the CV30 and then turn it back on. up and you cannot enter data. • Press and hold the Power button for 5 seconds to reset the CV30. • Clean boot the CV30. For help, see "Troubleshooting the Boot Process (Clean Booting)" on page 83. • Try reloading the operating system. For help, see "Upgrading the CV30" on page 80. • If the CV30 will not reset or boot, contact your local Intermec service representative for help. You tap the screen and nothing Align your screen. For help, see "Aligning the Touch Screen" happens. on page 7. CV30 Fixed Mount Computer User's Manual 75