Intermec CV30 CV30 Fixed Mount Computer User's Manual

Intermec CV30 Manual

Get Intermec CV30 PDF manuals and user guides View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals

Intermec CV30 manual content summary:

  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 1
    User's Manual CV30 Fixed Mount Computer
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 2
    service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications is a trademark of Bluetooth SIG, Inc., U.S.A. ii CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 3
    Information vii Global Services and Support vii Warranty Information vii Web Support vii Telephone Support viii Who Should Read This Manual ix Related Documents ix Patent Information ix 1 Using the CV30 Fixed Mount Computer 1 Introducing the CV30 Fixed Mount Computer 2 Understanding the
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 4
    WEP Security 44 Choosing Between Funk and Microsoft Security 44 Configuring Funk Security Using Intermec Settings 45 Configuring Funk Security Using the Profile Wizard 49 Configuring EAP-FAST with Profile Wizard 57 Configuring Microsoft Security 58 iv CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 5
    the CV30 Using an SD Card 81 Upgrading Your CV30 Using SmartSystems Server 82 Troubleshooting the Boot Process (Clean Booting 83 Cleaning the Screen 84 A Specifications 85 Physical and Environmental Specifications 86 Accessories for the CV30 86 CV30 Fixed Mount Computer User's Manual v
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 6
    vi CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 7
    and click Service & Support > Warranty. Web Support Visit the Intermec web site at www.intermec.com to download our current manuals (in PDF). To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. CV30 Fixed Mount Computer User's Manual vii
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 8
    3 • Renew a contract. • Inquire about repair billing or other service invoicing questions. Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click Contact. viii CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 9
    Read This Manual This CV30 Fixed Mount Computer User's Manual is for the person who is responsible for installing, configuring, and maintaining the CV30. This manual provides you with information about the features of the CV30, and how to install, configure, operate, maintain, and troubleshoot it
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 10
    Before You Begin There may be other U.S. and foreign patents pending. x CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 11
    you will find these sections: • Introducing the CV30 Fixed Mount Computer • Attaching the CV30 to Power • Understanding the Status Lights • Installing an External Antenna • Installing an External Keyboard • Connecting a Scanner • Increasing Memory Storage CV30 Fixed Mount Computer User's Manual 1
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 12
    with other 802.11 b/g wireless LAN devices. Understanding the Features of the CV30 The CV30 includes these standard features: • Touch screen heater • Two USB ports, two serial ports, and an Ethernet port • 802.11 b/g radio • Bluetooth radio 2 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 13
    memory expansion For additional help using the terminal emulation application, see the TE 2000 Terminal Emulation Programmer's Guide (P/N 977055-xxx). CV30 Headphones Zoom Volume down Brightness Understanding the Buttons on the CV30 Power Volume up CV30 Fixed Mount Computer User's Manual 3
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 14
    the CV30 to 10BaseT/100BaseT full duplex standard Ethernet interfaces. Use this manual to understand how to use the features and options available on the CV30. For a complete list of accessories available for the CV30, see "Accessories for the CV30" on page 86. 4 CV30 Fixed Mount Computer User
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 15
    setting as you hold the button. You can also adjust the brightness settings by going to Start > Settings > the Systems tab > Backlight or by using Intermec Settings. CV30 Fixed Mount Computer User's Manual 5
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 16
    cold conditions (0°C to -30°C or 32°F to -22°F) for an extended period of time, you should turn on the power at room temperature for at least 15 minutes prior to using it. This process of "warming up" the CV30 helps preserve the lighting on the display. 6 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 17
    see a menu of actions available for that item. On the pop-up menu that appears, tap the action you want to perform. Aligning the Touch Screen If the touch screen does not respond when you tap it with the stylus, you may need to align the screen. CV30 Fixed Mount Computer User's Manual 7
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 18
    information on performing a clean boot, see "Troubleshooting the Boot Process (Clean Booting)" on page 83. Attaching the CV30 to Power For the CV30 to operate, you must provide power to the CV30 through a DC/DC power supply or an AC/DC power supply. The CV30 also has a backup battery to sustain all
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 19
    need to reset the CV30. If the CV30 does not resume after pressing the Power button, or if the computer or an application is locked up, you may need to reset it. The CV30 uses the configuration currently saved in flash memory during the boot process. CV30 Fixed Mount Computer User's Manual 9
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 20
    Color Amber Green Description The amber light comes on when the backup battery is critically low. You need to replace the backup battery as soon as possible. This light comes on when the CV30 successfully decodes a bar code with an attached scanner. 10 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 21
    , a permanent mounting location and orientation may require some experimentation. In most fixed installations, you should mount the antenna initially in a vertically-polarized position, with the cable from the antenna parallel to the floor/ ceiling. CV30 Fixed Mount Computer User's Manual 11
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 22
    Keyboard There are two types of keyboards you can install and use with the CV30: • The compact keyboard (P/N VE011-2002) • Rugged QWERTY large external keyboards. For a complete list of available keyboards, see "Accessories for the CV30" on page 86. 12 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 23
    (COM3 or COM1) connectors on the CV30 if you order the appropriate RS-232 cable. Supported Scanners and Cables Scanner 1470 1400, 1551E, 1553, ASCII 1800 SR60 Slot scanner Required Cable Ships with the scanner 3-604032-05 3-364032-02 321-642-002 N/A CV30 Fixed Mount Computer User's Manual 13
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 24
    , see "Configuring the CV30 Using Intermec Settings" on page 30. 4 Go to Data Collection > Tethered Scanner (COM1) or (COM3). 5 Make sure Enable scanner port is checked. 6 Go to Scanner Settings > Scanner model and select your scanner from the list. 14 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 25
    SD card slot. To insert an SD card 1 Press Power to suspend the CV30. 2 Unscrew the six Phillips head screws from the top cover and remove the cover. Make sure you keep all of the screws. 3 Disconnect the antenna cable from the Remote Antenna connector. CV30 Fixed Mount Computer User's Manual 15
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 26
    (6 places) 802.11 Antenna cable SD card 5 Push the SD card into the slot until it latches in place. 6 Reattach the antenna cable, replace the top cover, and attach it with the six screws you removed in Step 2. 7 Press Power to resume using the CV30. 16 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 27
    2 Understanding Windows Mobile This chapter introduces Microsoft Windows Mobile 5.0 for Pocket PC. In this chapter you will find these sections: • Understanding Windows Mobile • Using Microsoft ActiveSync • Using Internet Explorer Mobile CV30 Fixed Mount Computer User's Manual 17
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 28
    Information in Windows Mobile For Information on: Programs on the CV30. Additional programs you can install on the CV30. See this Source: This chapter and the CV30 Help. To view Help, tap Start > Help and then select a topic. The Windows Mobile CD. 18 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 29
    /default.mspx Windows Mobile and many of the technologies supported by the CV30 are not from Intermec Technologies. Many of the utilities and features on a Windows Mobile device come directly from Microsoft without any modification from Intermec Technologies. There may be certain Microsoft-specific
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 30
    The following is a partial list of programs that are on your CV30, in the order they screen. Use the command bar to perform tasks in programs. The command bar includes menu names, functions, and the Input Panel icon when needed. Windows Mobile Command Bar 20 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 31
    using Block Recognizer, Letter Recognizer, or Transcriber. In either case, the characters appear as typed text on the screen. To show or hide the input panel 1 Tap the Input Panel icon. 2 Tap the arrow next to the Input Panel icon to see your choices. CV30 Fixed Mount Computer User's Manual 21
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 32
    stylus to the left across at least two keys. • To insert a carriage return, tap and hold the stylus anywhere on the keyboard and drag down. To use larger keys 1 Tap the input panel arrow. 2 Select Options. 3 From the Input method list, select Large keys. 22 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 33
    panel arrow and then tap Transcriber. 2 Tap ok. 3 Write anywhere on the screen. Pause and let Transcriber change the written characters to typed characters. For help using Transcriber, tap the question mark in the lower right-hand corner of the screen. CV30 Fixed Mount Computer User's Manual 23
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 34
    You can customize the CV30 by adjusting settings and installing additional software. Adjusting Settings You can adjust CV30 settings for your environment. To view the Settings options • Select Start > Settings > either the Personal tab or the System tab. 24 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 35
    in Random Access Memory (RAM). You can install any program created for the CV30, as long as the computer has enough memory available. Go to the Windows Mobile web site (www.microsoft.com/windowsmobile/resources/ communities/default.mspx) to find software. CV30 Fixed Mount Computer User's Manual 25
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 36
    process automatically begins when you finish the wizard. 4 Disconnect the CV30 from your desktop and go to work. Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your CV30. 26 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 37
    Help to understand the process you need to go through to set up a connection. 2 Tap Start > Internet Explorer. The default page that appears when you open Internet Explorer contains links to Intermecspecific information and to the Windows Mobile web site. CV30 Fixed Mount Computer User's Manual 27
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 38
    Chapter 2 - Understanding Windows Mobile Default Internet Explorer Web Page 28 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 39
    your network. In this chapter, you will find these sections: • Configuring the CV30 Operating Parameters • Setting Up Ethernet Communications • Setting Up Bluetooth Communications • Setting Up 802.11 Radio Communications • Configuring Security on the CV30 CV30 Fixed Mount Computer User's Manual 29
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 40
    application appears. For detailed information on the commands available in Intermec Settings, see the Intermec Computer Command Reference Manual (P/N 073529). The Intermec Computer Command Reference Manual is available from the Intermec web site. 30 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 41
    the bottom of the CV30. To use the CV30 in an Ethernet network 1 Go to Start > Settings > the Systems tab > Intermec Settings. 2 If you have a DHCP server, enable DHCP. or If you do not have a DHCP server, set these parameters: • IP address • Subnet mask CV30 Fixed Mount Computer User's Manual 31
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 42
    cold boot Guide in the Intermec Developer Library (IDL). You can download this resource kit from the Intermec Developer Library web site at www.intermec.com/idl. Use this table to understand the settings you see in the Bluetooth menu in Intermec Settings. 32 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 43
    for configuring the CV30 from Intermec Settings at the end of this section. To configure Bluetooth communications on the CV30 1 Select Start > Settings > the System tab > Intermec Settings. are disabled. 4 Save your changes and exit Intermec Settings. CV30 Fixed Mount Computer User's Manual 33
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 44
    Data Collection. You can now view and modify any symbology settings. To remove a wireless scanner from the CV30 1 Select Start > Programs > File Explorer > Program Files > Intermec > Network > Bluetooth > Bluetooth Scanner Wizard. 2 Tap Remove Device. 34 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 45
    you wanted to remove no longer appears in the list. 4 Tap Finish. Configuring Bluetooth Communications for Wireless Printing This section explains how to configure the CV30 for Bluetooth wireless printing. You need to: • make sure Bluetooth power is on. For help, see the procedure in "Setting
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 46
    Chapter 3 - Configuring the CV30 • Stores the wireless printing COM port in the registry as the WPort Specifically, the current wireless printer is within range appear in the devices list. 3 Select the printer you want to connect to and then tap OK. 36 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 47
    test page. To manually enter the device address of the printer 1 Select Start > Settings > the Systems tab > Wireless Printing. The Wireless Printing wizard appears. 2 Tap Manual. The wizard advances to the next screen where you enter the device address. CV30 Fixed Mount Computer User's Manual 37
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 48
    Wireless Printing. The Wireless Printing wizard appears. 3 Tap Set Different Printer. The Devices list appears with the list of previously discovered printers. 4 Select the printer you want and tap OK. 5 Tap or Mic gain slider bar to adjust the setting. 38 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 49
    the CV30. 4 Configure security. For help, see "Configuring Security on the CV30" on page 41. The easiest way to configure the network parameters on the CV30 is to use Intermec Settings. For help, see "Configuring the CV30 Using Intermec Settings" on page 30. CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 50
    From the menu, select Status > Wireless. The Wireless Status screen appears and checks the connection. You can also use iConnect to configure the network settings if you need to change anything by tapping Tools > Wireless Settings from the iConnect menu. 40 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 51
    are properly configured. For more information on 802.1x security, see the MobileLAN™ secure 802.1x Security Solution Installation Guide (P/N 073134) available at www.intermec.com. ad-hoc networks are private networks shared between two or more clients. CV30 Fixed Mount Computer User's Manual 41
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 52
    mode only). Note: You can also use a MobileLAN access point with software release 1.80 or later as an authentication server. For help, see the system manual for your access point. • an access point with an 802.11 b/g radio that supports WPA. 42 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 53
    Chapter 3 - Configuring the CV30 • a CV30 with the 802.11b/g radio and the 802.1x/WPA security option. The CV30 also supports Wi-Fi Protected Access 2 (WPA2) if you are as an authentication server. For help, see the system manual for your access point. CV30 Fixed Mount Computer User's Manual 43
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 54
    Between Funk and Microsoft Security The CV30 provides both Funk and Microsoft security choices. Funk security is the default setting. Use the following sections to v2.0 compliance • Support for LEAP, TTLS, and FAST • Configuration of up to four profiles 44 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 55
    these procedures to set WPA-802.1x, WPA2-802.1x, WPAPSK, or WPA2-PSK security on your CV30 with Funk security. To configure WPA-802.1x or WPA2-802.1x with Funk security 1 Make sure you have configured the communications and radio parameters on your CV30. CV30 Fixed Mount Computer User's Manual 45
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 56
    help, see "Loading a Certificate" on page 61. b For Validate Server Certificate, choose Yes. c You must enter a User Name and Subject Name. You can also enter a Server Common Name if you want to increase your level of security. 7 Exit Intermec Settings. 46 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 57
    Intermec Settings. Configuring 802.1x Security With Funk Security 1 Make sure you have configured the communications and radio parameters on your CV30 : a Select User name and type your user name. b Select Password prompt, and choose Enter password now. CV30 Fixed Mount Computer User's Manual 47
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 58
    and type a user password. 9 Exit Intermec Settings. Configuring Static WEP Security With Funk Security 1 Make sure you have selected Funk as your security choice. 2 Make sure you have configured the communications and radio parameters on your CV30. 48 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 59
    Settings > the Systems tab > Wireless Network. or Click the Wireless Network icon in the lower right corner of the screen and select Tools > Wireless Settings. 2 From the Profile list, select the profile you want to configure. 3 Tap Edit Selected Profile. CV30 Fixed Mount Computer User's Manual 49
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 60
    profile name. 7 (Optional) Check the Enable Power Management box to conserve battery power. 8 Click OK. Configuring WEP Security With Profile Wizard 1 In the Profile WEP. 5 From the Data TX Key list, select the key you want to use for transmitting data. 50 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 61
    page. 2 For 8021x Security, choose None. 3 For Association, choose WPA. 4 For Pre-Shared Key field, enter the passphrase as ASCII (12345). 5 Tap OK. Configuring WPA2-PSK Security With Profile Wizard 1 In the Profile Wizard, select the Security page. CV30 Fixed Mount Computer User's Manual 51
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 62
    With Profile Wizard Protected EAP (PEAP) performs secure authentication against Windows domains and directory services. It is comparable to EAP-TTLS, though not as flexible. To configure PEAP security 1 In the Profile Wizard, select the Security page. 52 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 63
    Chapter 3 - Configuring the CV30 2 For 8021x Security, choose PEAP. 3 For Association, choose Open, WPA, WPA2, or association. 5 For Username, type a unique username for this protocol. 6 In the Password field, type a unique password for this protocol. CV30 Fixed Mount Computer User's Manual 53
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 64
    Chapter 3 - Configuring the CV30 7 Select Prompt for password to have the user enter this password each time to access the protocol, or select Use following password to use the protocol without entering a password each time you use the CV30. 8 Tap Get Certificates to obtain or import server
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 65
    , or select Use following password to use the protocol without entering a password each time you use the CV30. 8 (Optional) Tap Get Certificates to obtain or import server certificates. For help with certificates, see "Loading a Certificate" on page 61. CV30 Fixed Mount Computer User's Manual 55
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 66
    form the Inner EAP list. 12 Check Validate Server Configuring LEAP Security With Profile Wizard LEAP is the Cisco Lightweight version of EAP. To configure LEAP security 1 In the Profile Wizard, select the Security page. 2 For 8021x Security, choose LEAP. 56 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 67
    , type a unique password for this protocol. 7 Select Prompt for password to have the user enter this password each time to access the protocol, or select Use following password to use the protocol without entering a password each time you use the CV30. CV30 Fixed Mount Computer User's Manual 57
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 68
    for public usage. 13 Tap OK. Configuring Microsoft Security The default security setting is Funk. If you want boot the CV30 for the new security choice to take effect. 4 Tap Yes. The CV30 resets and starts with Microsoft Security as the Security Choice. 58 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 69
    configure Microsoft security 1 Select Start > Settings > the Connections tab > WiFi > Add New. 2 Enter a network name. If the network was detected, the network name is entered and cannot be changed. 3 From the Connects to list to disable authentication: CV30 Fixed Mount Computer User's Manual 59
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 70
    Chapter 3 - Configuring the CV30 a Set Authentication to Open if WEP keys are not required or to Shared to AES or TKIP. c Enter the new Network key. 7 Tap Next. 8 From the EAP type list, select either PEAP or Smart Card or Cerficate and then tap Finish. 60 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 71
    Root Certificates and Import User Certificates functions. Note: For certificates to be valid, the CV30 must be set to the correct date and time. After cold booting the CV30, you may need to correct the date and time. To load certificates if you are using Active Directory 1 Configure the network and
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 72
    folders on the CV30. 2 Copy at least one root certificate .cer file into the \Temp\Root folder. 3 Copy at least one user certificate .cer file and key .pvk file into the \Temp\User folder. The filenames must match (for example, cert1.cer and cert1.pvk). 62 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 73
    always set security in your network. To disable security 1 Open Intermec Settings. 2 Choose Communications > 802.11 Radio > Microsoft Security. 3 For Network Authentication, choose Open. 4 For Data Encryption, choose Disabled. 5 Close Intermec Settings. CV30 Fixed Mount Computer User's Manual 63
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 74
    Chapter 3 - Configuring the CV30 64 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 75
    the CV30. You will also find information on installing applications and automatically launching them. This chapter contains these sections: • Developing Applications for the CV30 • Installing Applications on the CV30 • Launching an Application Automatically CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 76
    MB recommended) • 360 MB hard drive space for minimum installation (720 MB for complete) • CD-ROM drive compatible with multimedia PC specification • VGA or higher-resolution monitor (Super VGA recommended) • Microsoft Mouse or compatible pointing device 66 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 77
    Windows 2000/XP • Microsoft Visual Studio 2005 • Antares Migration Resource Kit (from IDL 2.4 or later) The resource kit is part of the Intermec Developer's Library (IDL), which you can download from the Intermec web site at www.intermec.com/idl. CV30 Fixed Mount Computer User's Manual 67
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 78
    perform clean boot. Since the flash in the system has a limited number of write cycles, do not use the Flash File Store for excessive writing. There are several ways you can install files and applications on the CV30: • SmartSystems server • ActiveSync • SD card • FTP server 68 CV30 Fixed Mount
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 79
    ActiveSync 1 Connect the CV30 to a PC using a USB cable. You may have to disconnect and then connect the cable to "wake" the connection. 2 Wait for a "Connected" message to appear in the Microsoft ActiveSync application to signal a connection to the CV30. CV30 Fixed Mount Computer User's Manual 69
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 80
    file into the desired folder. 7 When you are done copying files, reset the CV30. 8 After the CV30 is done resetting, tap Start > Programs > File Explorer to locate the newly copied card for your CV30, this is the best place for you to install applications. 70 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 81
    . 2 Schedule the CV30 updates or manually initiate an update using the Avalanche Administrative Console. For more information on using Wavelink Avalanche, contact your local Intermec representative or visit the Wavelink web site at www.wavelink.com. CV30 Fixed Mount Computer User's Manual 71
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 82
    reset on the CV30: • Make sure your CAB file places a shortcut to your application in the \Windows\StartUp folder. • Configure the AutoRun program to launch your application. The CV30 white spaces. AutoRun only supports one set of quotes per command. 72 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 83
    solution. You will also find information on routine maintenance. This chapter contains these sections: • Calling Product Support • Troubleshooting the CV30 • Upgrading the CV30 • Troubleshooting the Boot Process (Clean Booting) • Cleaning the Screen CV30 Fixed Mount Computer User's Manual 73
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 84
    application. To find your operating system version 1 Go to Start > Internet Explorer. 2 Tap Intermec. An Intermec page opens and displays the OS version loaded on the CV30. To find your configuration number • Look at the label on the back of the CV30. 74 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 85
    , see "Upgrading the CV30" on page 80. • If the CV30 will not reset or boot, contact your local Intermec service representative for help. You tap the screen and nothing Align your screen. For help, see "Aligning the Touch Screen" happens. on page 7. CV30 Fixed Mount Computer User's Manual 75
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 86
    Troubleshooting and Maintaining the CV30 Problems While Configuring Security Problem Solution You are setting up multiple access The CV30 Apply Network Settings from the 802.11 Radio after you clean boot the CV30. menu. You are using static WEP keys Make CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 87
    computer. Check with your network computer is not receiving any data administrator or see the user's manual for the Intermec from the CV30. Application Server. In a TCP/IP network, there may be a problem with the connection between the access point and the host computer. Check with your network
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 88
    . The scanner does not read The scanner window may be dirty. Clean the window with a the bar code labels quickly, solution of ammonia and water. Wipe dry. Do not allow abrasive or scanning beam seems to material to touch the window. be faint or obscured. 78 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 89
    you cannot change the configuration. The configuration settings Try disabling and then enabling the scanner port state to in the Intermec Settings do synchronize the CV30 settings with the scanner. not match the settings on your 1551E or 1553 scanner. CV30 Fixed Mount Computer User's Manual 79
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 90
    your desktop computer. To download the upgrade files 1 Start your web browser and go to the Intermec web site at www.intermec.com. 2 Go to Service & Support > Downloads. 3 Select Computers: CV30 Fixed Mount from the list. 4 Select the download you need. Make sure the download you select is for the
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 91
    Files\Intermec\< CV30. Note: Make sure the CV30 has completely loaded all of the upgrade files before you remove the SD card or reset the computer. 7 Perform a clean boot on the CV30. For help, see "Troubleshooting the Boot Process (Clean Booting)" on page 83. CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 92
    , you need: • SmartSystems Foundation. To download SmartSystems Foundation, go to www.intermec.com/SmartSystems. • the device upgrade .exe file. This file is available from the Intermec web site at www.intermec.com. Go to Service & Support > Downloads. 82 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 93
    that are absolutely required by the operating system. Use the clean boot to troubleshoot the computer by getting it up and running so that you can perform diagnostic tests to determine which elements of the normal boot process are causing problems. CV30 Fixed Mount Computer User's Manual 83
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 94
    5 - Troubleshooting and Maintaining the CV30 To clean boot the CV30 1 Using a small pointed device (such as the end of the stylus) or your finger, press the Reset switch on the top of the CV30 at the same time as you press the Power button. Do not use force or a sharp object when pressing the reset
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 95
    A Specifications CV30 Fixed Mount Computer User's Manual 85
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 96
    use these accessories (sold and ordered separately) with the CV30. To order accessories, contact your local Intermec sales representative. 2455/CV30 Adapter Plate (P/N VE011-2011) Use this adapter plate to mount the CV30 in an existing 2455 installation. 86 CV30 Fixed Mount Computer User's Manual
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 97
    A - Specifications CV30 Cable Protector (P/N VE011-2013) Use the cable protector to keep your cables from getting disconnected from the CV30. CV30 Compact Keyboard (P/N VE011-2002) Use the compact keyboard to save space or to have a keyboard that you can attach directly to the CV30. CV30 Compact
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 98
    the CV30. Universal Power Supply (P/N 851-082-004) Use the universal power supply to supply AC power to the CV30. You need to purchase a country-specific power cord separately. The universal power supply does not provide power for the internal touch screen heater. 88 CV30 Fixed Mount Computer User
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 99
  • Intermec CV30 | CV30 Fixed Mount Computer User's Manual - Page 100
    Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com CV30 Fixed Mount Computer User's Manual *935-005-001* P/N 935-005-001
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
CV30 Fixed Mount
Computer
User’s Manual