HP Latex R2000 Site Preparation Guide - Page 22
RIP requirements, HP Scitex ONYX Thrive RIP v12.1 or later: product number D9Z41A
View all HP Latex R2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Remote domain hp.com heleni.me Protocol and port https 443 https 443 NOTE: If needed, please instruct the customer IT to create routing rules that route around the proxy for these addresses. ● A minimum upload speed of 5 Mb/s is required. HP provides the following system components: HP provided components ● HP Internal Print Server - PC and power cord - PC LAN card connections: 2 Ethernet ports, one for the e-box LAN cable to connect the printer to the PC, and the other to connect to the network - 2 monitor and power cords - Windows 10 Embedded - HP Internal Print Server software Customer provided components ● Ethernet LAN (minimum 1 Gb/s) connection ● RIP station and software ● CAT-6 LAN cable long enough to connect the printer to the network RIP requirements There are two RIPs offered by HP that may be used with the printer: ● HP Scitex ONYX Thrive RIP v12.1 (or later): product number D9Z41A ● HP Scitex Caldera Grand RIP v11.1 (or later): product number L5E74A The software and hardware requirements of these RIPs are as follows. HP Scitex ONYX Thrive RIP v12.1 or later ● Main Workstation requirements: - Operating System: Microsoft Windows 7 Professional operating system 64-bit or newer (32-bit not supported) NOTE: 32-bit operating systems have a hardware limit of 4 GB of RAM. It is recommended you use 64-bit operating systems for high volume workflows. - Processor: Multi-core processor - RAM: 8 GB minimum (4 GB / core recommended) - Hard Drive: 500 GB (7200 rpm) (250 GB+ free space 18 Chapter 2 Site preparation ENWW