HP Latex R2000 Site Preparation Guide - Page 20

Physical specifications (continued) Depth 2.04 m (6ft 8.31 in) Height 1.747 m (5ft 8.78 in) 2.04 m (6ft 8.31 in) 1.747 m (5ft 8.78 in) IMPORTANT: The following diagram shows only dimensions for optimal printing layout, to meet ventilation requirements follow the instructions in the corresponding chapter. See Air conditioning on page 13. In the table below, the letter in the left column corresponds to the room layout illustration above. HP Latex R1000 Printer (64") A 2.04 m (6ft 8.31 in) B 4.21 m (13ft 9.75 in) C 0.65 m (2ft 1.59 in) D 0.94 m (3ft 1 in) E 1.2 m (3ft 11.24 in) F 6.61 m (21ft 8.24 in) G 6.03 m (19ft 9.4 in) HP Latex R2000 Printer (98") 2.04 m (6ft 8.31 in) 5.1 m (16ft 8.79 in) 0.65 m (2ft 1.59 in) 0.94 m (3ft 1 in) 1.8 m (5ft 9.05 in) 8.7 m (28ft 6.51 in) 7.23 m (23ft 8.65 in) NOTE: The extension tables measure 0.94 m (3 ft 1 in), when using them it is recommended to add this dimension to the recommended space shown in the above table, to all sides of the printer. NOTE: If very large substrate is to be used, make sure to take it into account when choosing where to install the printer. The ceiling of the room should be at a minimum height of 3 m (9 ft 8.43 in) above the floor. WARNING! The zone surrounding the printer should be considered a restricted access area and signaled accordingly. Only trained personnel should be operating within this area. 16 Chapter 2 Site preparation ENWW