Epson SureColor T7770DM Users Guide - Page 363
CAD/Line Drawing, Roll Paper Banner, Source, Cut sheets, Paper 260
![]() |
View all Epson SureColor T7770DM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
* For these paper types the default top and bottom margins are 0.8 inch (20 mm): Epson Premium Glossy Photo Paper (250),Epson Premium Semigloss Photo Paper (250), Epson Premium Luster Photo Paper (260), and Epson Premium Semimatte Photo Paper (250). When printing on Epson Singleweight Matte Paper in CAD/Line Drawing mode, the default top and bottom margins are 0.12 inch (3 mm). ** The maximum printable length using the Epson driver on Windows is 298 feet (91 m). To print longer images, you need to use third-party banner printing software and select Roll Paper (Banner) as the Source setting in the printer driver. Note: Actual maximum print length depends on print application, paper size, printer driver settings, and operating system. Cut sheets Note: When printing borderless, the left and right margins are set to 0. (Borderless printing is not available with poster board.) 1 Printable width: 7.16 to 44 inches (182 to 1118 mm) 2 Left/right/bottom margin: 0.12 inch (3 mm) 3 Top margin: 0.5 inch (12.7 mm) 4 Printable length: 8.66 to 62.99 inches (220 to 1600 mm) Note: The smallest size supported by the printer is 10 inches (254 mm) wide by 5 inches (127 mm) long. If you create a custom paper size that is smaller than 10 × 5 inches (254 × 127 mm), the document will print with wider-than-expected margins, which must be trimmed. 363
![](/manual_guide/products/epson-surecolor-p8570d-users-guide-897499b/363.png)