Epson Runsense SF-810 User Manual - Epson Run Connect for iOS - Page 21

Changing product settings Setting items Value Explanation Tap (Only for the measurement screen) Lap Light Screen Chg. OFF* You can perform one of the functions specified in this item by tapping the screen while measuring. When Bike is selected as the Activity Type, the tap function may operate automatically depending on the condition of the road surface. If this occurs, we recommend to change the setting to OFF. Screen Screen1 Screen2 Screen3 Screen4 You can display up to four measurement screens. You can change the screen pattern and the measurement items displayed for each screen. You can also change the Display Lap Screen, but this is not displayed for the interval function. Display Lap Screen *Indicates the default setting. **You have to enter an altitude when setting a waypoint on your mobile device. Advanced settings AT Lap Use the AT Lap function to automatically record laps whenever a set time or distance is reached. See "Setting the AT Lap Function" on page 22. Target Pace Use the Target Pace function to sound an alarm if you fall behind your preset pace. See "Setting the Target Pace Function" on page 25. Waypoint Use the Waypoint function to set target locations on the map. See "Setting waypoints" on page 28. Interval Use the Interval function to record alternating sets of hard and light exercise. See "Setting the Interval Function" on page 30. Displaying advanced settings 1 Tap the Run Connect icon on your mobile device. 21