Epson Runsense SF-810 User Manual - Epson Run Connect for iOS - Page 20

Changing product settings Setting items Value Alarm Tones* Vib. Tones & Vib. OFF Key Tones ON* OFF *Indicates the default setting. Explanation Adjusts the alarm type. Turns button sounds on or off. Meas.Settings Available settings may vary depending on the model you are using. Setting items Activity Type Interval AT Lap AT Pause Target Pace Waypoint HR Value Run* Walk Bike SETTING 01 to 03 SETTING 01 to 05 OFF* ON OFF* SETTING 01 to 03 OFF* ON OFF* ON OFF* Explanation Set when running or jogging. Set when walking. Set when performing exercises that do not require you to swing your arms, such as riding a bike. Set the contents of high-intensity training (sprint) and low-intensity training (recovery) and the number of times they are repeated. When a time or distance set in advance is reached, this function records laps automatically. Set the lap time or distance. You can set five times or distances within the following range. Time: 01'00" to 60'00" (in increments of 1 minute) Distance: 0.1 to 10.0 mi/km (in increments of 0.1 mi/km) This function automatically stops measuring when you stop running, and resumes when you continue running. Set the target time and pace range for one kilometer/mile. An alarm sounds if you are outside the set pace range. You can set three target paces within the following range. Target Pace: 1'00" to 15'00"/mi or km (in increments of 1 second) Pace Range: 00'05" to 03'00"/mi or km (in increments of 1 second) You can specify a registered waypoint to display the direction, distance, and altitude difference** to that point. As you approach the specified point, an alarm sounds. You can measure your heart rate. For SF-810, the default setting is ON. 20