Epson LightScene EV-100 Users Guide - Page 99
Setting the Projector ID, Using Multiple Projectors
View all Epson LightScene EV-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Parent topic: Using Multiple Projectors Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID. 1. Press the Menu button. 2. Select the Extended menu and press Enter ( ). 3. Select the Multi-Projection setting and press Enter ( ). 4. Select Projector ID and press Enter ( ). 5. Press the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter ( ). Repeat these steps for all the other projectors you want to operate from one remote control. Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button to temporarily display the projector's ID on the screen. Parent topic: Projector Identification System for Multiple Projector Control Related references Projector Setup Settings - Extended Menu 99