Epson LightScene EV-100 Users Guide - Page 56
Controlling a Networked Projector Using Crestron Connected, Others, Enter, Crestron Connected
View all Epson LightScene EV-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Select the Others menu and press Enter ( ). 5. Set the Crestron Connected setting to On to allow the projector to be detected. Note: Enabling Crestron Connected disables the Epson Message Broadcasting feature in the Epson Projector Management software. 6. Turn off the projector, then turn it on again to enable the setting. Parent topic: Using Crestron Connected Related references Projector Setup Settings - Extended Menu Controlling a Networked Projector Using Crestron Connected Once you have set up your projector to use Crestron Connected, you can control and monitor projection using a compatible web browser. 1. Start your web browser on a computer connected to the network. 2. Type the projector's IP address into the browser's address box and press the computer's Enter key. 56