Epson LightScene EV-100 Users Guide - Page 62
Setting Up Web API, Channel/Function, Operation, Parameters, Description, Cannot control, Parent topic
View all Epson LightScene EV-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Channel/Function Operation 10 Content playback Playlist 41 Playlist 42 Playlist 43 Playlist 44 Playlist 45 Playlist 46 Playlist 47 Playlist 48 Playlist 49 Playlist 50 Non-operational 11 Power control Power off Non-operational Power on 13 Lock Cannot control Can control Parameters 164 to 167 168 to 171 172 to 175 176 to 179 180 to 183 184 to 187 188 to 191 192 to 195 196 to 199 200 to 203 204 to 255 0 to 63 (default is 128) 64 to 191 192 to 255 0 to 127 (default is 0) 128 to 255 Description Turns the projector power on or off Enables/disables ArtNet operations Note: If you are controlling the projector using Art-Net and operating it from the remote control, settings made by the DMX controller or application software may differ from the projector's actual status. If you want to apply all the channel controls to the projector, set Channel 13 to Cannot control, then set it back to Can control. Parent topic: Using the Projector on a Network Setting Up Web API You can setup Web API from a Web browser and operate the projector using Web API. 1. Open the Epson Web Control from your Web browser. 2. Select Developer's Menu. 3. Set the Enable API setting to On. 62