Epson FX-890IIN Users Guide - Page 46
Loading paper in the front sheet guide, position, as shown in the table below.
View all Epson FX-890IIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User's Guide Loading paper in the front sheet guide You can load single sheets or multipart forms one at a time in the front sheet guide. Follow these steps: ! Caution: Do not load labels or envelopes in the front sheet guide. 1. Make sure the sheet guide is in the upright position and the edge guides are open all the way to the left and right. Set the paper release lever to the single-sheet position. 2. If you are using ordinary single-sheet paper, set the paper-thickness lever (located under the printer cover) to 0 as shown below. If you are loading a single-sheet multipart form, set the paper-thickness lever to the proper position, as shown in the table below. Multipart form type 2 parts (original + 1 copy) 3 parts (original + 2 copies) 4 parts (original + 3 copies) 5 parts (original + 4 copies) 6 parts (original + 5 copies) Paper-thickness lever position 1 2 4 6 7 3. Turn on the printer, if necessary. 4. Slide the left edge guide to the triangle mark on the sheet guide. Then adjust the right edge guide to match the width of your paper. Paper Handling 46