Epson FX-890IIN Users Guide - Page 157
Transporting the Printer, Caution, Warning
View all Epson FX-890IIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User's Guide 4. If the outer case and the sheet guide are still dirty or dusty, clean them with a soft, clean cloth dampened with mild detergent dissolved in water. Keep the printer cover and front cover closed to prevent water from getting inside the printer. ! Caution: ❏ Never use alcohol or thinners to clean the printer; these chemicals can damage the printer components as well as the case. ❏ Be careful not to get water on the printer mechanism or electronic components. ❏ Do not use a hard or abrasive brush. Do not spray the inside of the printer with lubricants; unsuitable oils can damage the printer mechanism. Contact your Epson dealer if you think lubrication is needed. Transporting the Printer If you need to transport your printer for some distance, carefully repack it using the original box and packing materials. Follow these steps to repack the printer in its original packing materials: ! Warning: You need to move the print head by hand to remove the ribbon cartridge. If you have just used the printer, the print head may be hot; let it cool for a few minutes before touching it. 1. Remove any paper loaded in the printer. Make sure the printer is turned off. 2. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer. If an optional cut-sheet feeder is installed, remove it. 3. Remove the sheet guide. If any options are installed, remove them and pack them in their original boxes. 4. Make sure the print head is not hot. Then remove the ribbon cartridge as described in "Replacing the ribbon cartridge" on page 119. 5. Make sure that the paper tension unit is installed and the tractor is installed in the rear push position. (See "Installing the tractor in the rear push position" on page 22 for instructions on installation procedure.) Also make sure that the printer cover and front cover are closed. Product Information 157