Epson FX-890IIN Users Guide - Page 39
Epson FX-890IIN Manual
View all Epson FX-890IIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User's Guide 1. Remove any paper loaded on the pull tractor as described in "Removing paper from the pull tractor" on page 38. 2. Make sure the printer is turned off. Then open the paper guide cover by pulling its back edge toward you. 3. Lift the printer cover and pull it straight up and off the printer. 4. Press the tractor's lock tabs, tilt the tractor toward you, and lift it off the printer. 5. Store the tractor in a safe place, or install it in the front or rear push position as described in "Using the tractor in the front push position" on page 26 or "Using the tractor in the rear push position" on page 21. 6. Reinstall the paper tension unit by lower it onto the printer's mounting pegs. Then press down on both ends of the unit until it clicks into place. 7. Replace the printer cover. Paper Handling 39