Dell XPS 13 9370 XPS 13 Service Manual - Page 31

Removing the fans, Prerequisites, Procedure

Get Dell XPS 13 9370 PDF manuals and user guides View all Dell XPS 13 9370 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

19 Removing the fans NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1. Remove the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board. 2. Lift the wireless antenna and camera cable bracket from the system board. 3. Disconnect and lift the camera cable from the system board, peeling off the tape securing the camera cable to the fans. 4. Disconnect the right fan cable from the system board. 5. Disconnect the left fan cable from the system board. 6. Remove the two screws (M1.6x3) that secure the left and right fan to the system board. 7. Lift the left and right fans along with their cables off the system board. Removing the fans 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
Removing the fans
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After
working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Prerequisites
Remove the
base cover
.
Procedure
1.
Remove the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board.
2.
Lift the wireless antenna and camera cable bracket from the system board.
3.
Disconnect and lift the camera cable from the system board, peeling off the tape securing the camera cable to the fans.
4.
Disconnect the right fan cable from the system board.
5.
Disconnect the left fan cable from the system board.
6.
Remove the two screws (M1.6x3) that secure the left and right fan to the system board.
7.
Lift the left and right fans along with their cables off the system board.
19
Removing the fans
31