Dell XPS 13 9370 XPS 13 Service Manual - Page 18
Replacing the solid-state drive, Procedure, Post-requisites
View all Dell XPS 13 9370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
8 Replacing the solid-state drive NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Procedure 1. Align the notches on the solid-state drive with the tabs in the solid-state drive slot, then slide the solid-state drive at an angle into the solid-state drive slot. 2. Slide the solid-state drive shield into the solid-state drive shield slot. Then align the screw hole on the solid-state drive shield and solidstate drive to the screw hold on the system board. 3. Replace the screw (M2x3L) that secures the solid-state drive to the system board. Post-requisites Replace the base cover. 18 Replacing the solid-state drive