Dell XPS 13 9370 XPS 13 Service Manual - Page 24

Replacing the heat sink, Procedure, Post-requisites

Get Dell XPS 13 9370 PDF manuals and user guides View all Dell XPS 13 9370 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

14 Replacing the heat sink NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that thermal conductivity is achieved. Procedure 1. Align the screw holes on the heat sink with the screw holes on the system board. 2. Replace the four screws (M2x3) that secure the heat sink to the system board in sequential order (as indicated on the heat sink). Post-requisites Replace the base cover. 24 Replacing the heat sink

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
Replacing the heat sink
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After
working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
CAUTION:
Incorrect alignment of the heat sink can damage the system board and processor.
NOTE:
If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure
that thermal conductivity is achieved.
Procedure
1.
Align the screw holes on the heat sink with the screw holes on the system board.
2.
Replace the four screws (M2x3) that secure the heat sink to the system board in sequential order (as indicated on the heat sink).
Post-requisites
Replace the
base cover
.
14
24
Replacing the heat sink