Dell Precision 5520 Owners Manual - Page 30

re-connect them correctly after you replace the system board.

Get Dell Precision 5520 PDF manuals and user guides View all Dell Precision 5520 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

NOTE: Your computer's Service Tag is located under the system badge flap. You must enter the Service Tag in the BIOS after you replace the system board. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can re-connect them correctly after you replace the system board. 3. Remove the M2x2 screw securing the metal bracket for the LVDS to the system board [1] and remove the bracket off the computer [2]. Then, disconnect the LVDS cable from the system board [3]. 4. Slide out the connector latches to disconnect all the cables from the system board. 5. Perform the following steps to remove the system board from the computer: a) Remove the five M2x4 screws that secure the system board to the computer [1]. b) Lift the system board off the computer [2]. 30 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
NOTE:
Your computer’s Service Tag is located under the system badge flap. You must enter the Service Tag in the
BIOS after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can
re-connect them correctly after you replace the system board.
3.
Remove the M2x2 screw securing the metal bracket for the LVDS to the system board [1] and remove the bracket off the computer
[2]. Then, disconnect the LVDS cable from the system board [3].
4.
Slide out the connector latches to disconnect all the cables from the system board.
5.
Perform the following steps to remove the system board from the computer:
a)
Remove the five M2x4 screws that secure the system board to the computer [1].
b)
Lift the system board off the computer [2].
30
Disassembly and reassembly