Dell Precision 5520 Owners Manual - Page 16

Installing the Hard Drive, Speaker, Removing the Speakers

Get Dell Precision 5520 PDF manuals and user guides View all Dell Precision 5520 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Installing the Hard Drive 1. Replace the hard-drive covers on the hard drive. 2. Connect the hard-drive interposer to the hard-drive assembly. 3. Place the hard-drive assembly on the palm-rest assembly. 4. Connect the hard-drive cable to the system board. 5. Align the screw holes on the hard-drive cage with the screw holes on the hard-drive assembly. 6. Replace the four M2x4 screws that secure the hard-drive cage to the palm-rest assembly. 7. Install the: a) battery b) base cover 8. Follow the procedures in After Working Inside Your Computer. Speaker Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) Base cover b) battery 3. Perform the following steps to remove the speaker: a) Disconnect the speaker cable from the audio board [1]. b) Remove the 4 M2x2 screws that secure the speakers to the computer [2]. c) Lift the speakers, along with the speaker cable, off the computer [3]. 16 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Installing the Hard Drive
1.
Replace the hard-drive covers on the hard drive.
2.
Connect the hard-drive interposer to the hard-drive assembly.
3.
Place the hard-drive assembly on the palm-rest assembly.
4.
Connect the hard-drive cable to the system board.
5.
Align the screw holes on the hard-drive cage with the screw holes on the hard-drive assembly.
6.
Replace the four M2x4 screws that secure the hard-drive cage to the palm-rest assembly.
7.
Install the:
a)
battery
b)
base cover
8.
Follow the procedures in
After Working Inside Your Computer.
Speaker
Removing the Speakers
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
Base cover
b)
battery
3.
Perform the following steps to remove the speaker:
a)
Disconnect the speaker cable from the audio board [1].
b)
Remove the 4 M2x2 screws that secure the speakers to the computer [2].
c)
Lift the speakers, along with the speaker cable, off the computer [3].
16
Disassembly and reassembly