Dell Precision 5520 Owners Manual - Page 25
Installing the Heatsink, Power connector port, Removing the DC-in Connector
View all Dell Precision 5520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing the Heatsink 1. Align the screw holes on the heatsink with the screw holes on the system board. 2. Replace the screws to secure the heatsink to the system board. 3. Install the: a) battery b) base cover 4. Follow the procedures in After Working Inside Your Computer. Power connector port Removing the DC-in Connector 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) Base cover b) battery 3. Perform the following steps to remove the I/O board: a) Disconnect the DC-in cable from the system board [1]. b) Remove the M2x3 screw that secures the DC-in cable to the computer. c) Remove the DC-in connector from the computer. Disassembly and reassembly 25
Installing the Heatsink
1.
Align the screw holes on the heatsink with the screw holes on the system board.
2.
Replace the screws to secure the heatsink to the system board.
3.
Install the:
a)
battery
b)
base cover
4.
Follow the procedures in
After Working Inside Your Computer.
Power connector port
Removing the DC-in Connector
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
Base cover
b)
battery
3.
Perform the following steps to remove the I/O board:
a)
Disconnect the DC-in cable from the system board [1].
b)
Remove the M2x3 screw that secures the DC-in cable to the computer.
c)
Remove the DC-in connector from the computer.
Disassembly and reassembly
25