D-Link DIR-859 User Manual - Page 55
DHCP Lease, Always, Broadcast, WAN Port, Speed, IPv4 Multicast, Streams, IPv6 Multicast
View all D-Link DIR-859 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Section 3 - Configuration Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Enter the length of time for the IP address lease in minutes. Time: Always Enable this feature to broadcast your networks DHCP server to LAN/ Broadcast: WLAN clients. WAN Port You may set the port speed of the Internet port to 10 Mbps, 100 Speed: Mbps, 1000 Mbps, or Auto (recommended). UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software and peripherals. IPv4 Multicast Enable to allow IPv4 multicast traffic to pass through the router from Streams: the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Streams: the Internet. Click Save when you are done. D-Link DIR-859 User Manual 51