D-Link DIR-859 User Manual - Page 35
L2TP Gateway IP Address
View all D-Link DIR-859 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Section 3 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP can provide you with a username and password. L2TP Server IP Enter the L2TP Server IP Address provided by your ISP. Address: Username: Enter the Username provided by your ISP. Password: Enter the Password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Auto-reconnect. Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. L2TP IP Address: Enter the L2TP IP Address provided by your ISP (for Static IP only). L2TP Subnet Enter the L2TP Subnet Mask provided by your ISP (for Static IP Mask: only). L2TP Gateway IP Enter the L2TP Gateway IP Address provided by your ISP (for Address: Static IP only). Primary DNS Enter the Primary DNS Server IP address assigned by your ISP. Server: Secondary DNS Enter the Secondary DNS Server IP address assigned by your ISP. Server: D-Link DIR-859 User Manual 31