D-Link DGS-3312SR Product Manual - Page 173
SNMP Host Table, SNMP Community Table Configuration window, Parameter, Description
View all D-Link DGS-3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
DGS-3312SR Gigabit Layer 3 Switch An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to the Switch's SNMP agent. An MIB view that defines the subset of all MIB objects that will be accessible to the SNMP community. Read/write or read-only level permission for the MIB objects accessible to the SNMP community. Figure 7- 12. SNMP Community Table Configuration window The following parameters can set: Parameter Description Community Name View Name Access Right Type an alphanumeric string of up to 33 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch's SNMP agent. Type an alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the Switch. The view name must exist in the SNMP View Table. Read_Only − Specifies that SNMP community members using the community string created with this command can only read the contents of the MIBs on the Switch. Read_Write − Specifies that SNMP community members using the community string created with this command can read from and write to the contents of the MIBs on the Switch. SNMP Host Table Use the SNMP Host Table to set up SNMP trap recipients. Open the Management folder, and then the SNMPV3 folder. Finally, click on the SNMP Host Table link. This will open the SNMP Host Table window, as shown below. To delete an existing SNMP Host Table entry, click the corresponding X icon under the Delete heading. 160