D-Link DCS-935L User Manual - Page 25

Network - d link default password

Get D-Link DCS-935L PDF manuals and user guides View all D-Link DCS-935L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Section 3 - Configuration This section allows you to configure your network settings. Network DHCP Select this connection if you have a DHCP server running on your network and Connection: would like a dynamic IP address to be updated to your camera automatically. Static IP Address: You may obtain a static or fixed IP address and other network information from your network administrator for your camera. IP Address: Enter the IP address that the camera will use on your network. You may need to get this information from your ISP or network administrator. Subnet Mask: The default value is "255.255.255.0." Used to determine if the destination is part of the same subnet. Default Gateway: The gateway used to forward frames to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: Primary domain name server that translates names to IP addresses. Secondary DNS: Secondary domain name server to backup the Primary DNS. PPPoE Settings: If you are using a PPPoE connection, enable it and enter the User ID(username) and Password for your PPPoE account. You can get this information from your Internet service provider (ISP). D-Link DCS-935L User Manual 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
25
D-Link DCS-935L User Manual
Section 3 - Configuration
Network
This section allows you to configure your network settings.
Select this connection if you have a DHCP server running on your network and
would like a dynamic IP address to be updated to your camera automatically.
You may obtain a static or fixed IP address and other network information from
your network administrator for your camera.
IP Address:
Enter the IP address that the camera will use on your network. You
may need to get this information from your ISP or network administrator.
Subnet Mask:
The default value is “255.255.255.0.” Used to determine if the
destination is part of the same subnet.
Default Gateway:
The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the failure of transmissions
to a different subnet.
Primary DNS:
Primary domain name server that translates names to IP addresses.
Secondary DNS:
Secondary domain name server to backup the Primary DNS.
If you are using a PPPoE connection, enable it and enter the User ID(username)
and Password for your PPPoE account. You can get this information from your
Internet service provider (ISP).
DHCP
Connection:
Static IP Address:
PPPoE Settings: