Compaq Pro 6305 Maintenance and Service Guide Pro 6305 Microtower Business PC - Page 145
Hood Sensor
View all Compaq Pro 6305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Hood Sensor Description Hood sensor Spare part number 638816-001 The hood sensor is attached in a slot in the rear of the chassis. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 99). 2. Remove the access panel (Access Panel on page 100). 3. Unplug the sensor cable from the system board connector labeled HSENSE (1). 4. Slide the hood sensor straight out of the notch in the chassis (2). NOTE: A flat blade screwdriver can be used to push the hood sensor out of the slot. Figure 7-40 Removing the hood sensor from the chassis fan To install the hood sensor, reverse the removal procedure. Hood Sensor 135
Hood Sensor
Description
Spare part number
Hood sensor
638816-001
The hood sensor is attached in a slot in the rear of the chassis.
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
99
).
2.
Remove the access panel (
Access Panel
on page
100
).
3.
Unplug the sensor cable from the system board connector labeled HSENSE
(1)
.
4.
Slide the hood sensor straight out of the notch in the chassis
(2)
.
NOTE:
A flat blade screwdriver can be used to push the hood sensor out of the slot.
Figure 7-40
Removing the hood sensor from the chassis fan
To install the hood sensor, reverse the removal procedure.
Hood Sensor
135