Cisco C1861-SRST-B/K9 Hardware Installation Guide - Page 31
Preinstallation Requirements
![]() |
UPC - 882658171147
View all Cisco C1861-SRST-B/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 C H A P T E R Preinstallation Requirements This chapter describes the site requirements and equipment necessary for installing your Cisco 1800 series fixed-configuration integrated services router. This chapter includes the following sections: • Safety Recommendations, page 2-2 • General Site Requirements, page 2-4 • Installation Checklist, page 2-5 • Creating a Site Log, page 2-6 • Inspecting the Router, page 2-7 • Required Tools and Equipment for Installation and Maintenance, page 2-7 Note To see translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for Cisco 1800 Integrated Services Routers (Fixed) document and for wireless routers, the Declarations of Conformity and Regulatory Information for Cisco Access Products with 802.11a/b/g and 802.11b/g Radios document that accompany your router. Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Warning Before opening the unit, disconnect the telephone-network cables to avoid contact with telephone-network voltages. Statement 1041 Warning This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260. Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The telecommunications lines must be disconnected 1) before unplugging the main power connector or 2) while the housing is open, or both. Statement 1043 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 2-1
![](/manual_guide/products/cisco-1801w-hardware-installation-guide-32603cd/31.png)