Bosch HBE5451UC Installation Instructions - Page 8

Four-wire Connection Ungrounded Neutral SRZHUVXSSO\ MXQFWLRQER[ UHGZLUHV EODFNZLUHV Mount to cabinet NOTICE: Before installing the appliance, be sure to verify the cabinet dimensions and electrical connections. Note: The appliance is heavy. It is advisable to install it with a second person. JUHHQRUEDUH ZLUH JUHHQZLUH 8/OLVWHG FRQQHFWRU ZKLWHZLUHV FDEOHIURP RYHQ ▯ Connect the red oven wire to the red electrical supply wire (hot wire). ▯ Connect the black oven wire to the black electrical supply wire (hot wire). ▯ Connect the white neutral oven wire to the white neutral (not bare or green ground) electrical supply wire. ▯ Connect the green ground oven wire to the bare or green ground electrical supply wire. Three-wire Connection Grounded Neutral SRZHUVXSSO\ MXQFWLRQER[ UHGZLUHV EODFNZLUHV ZKLWHEDUHRU JUHHQZLUH ZKLWHZLUH JUHHQZLUH 8/OLVWHG FRQQHFWRU FDEOHIURP RYHQ ▯ Connect red wire from oven to red wire in junction box. ▯ Connect black wire from oven to black wire in junction box.. ▯ Connect both green ground wire and white wire from oven to white, green or bare neutral wire in junction box. The conduit cable, where connected at the oven, swivels. Rotate conduit cable upward (or downward) and direct through hole prepared in cabinet to attach to junction box. To maintain serviceability, the flex conduit must not be shortened and should be routed to permit temporary removal of the oven. 1. Fully insert the appliance and centre it. NOTICE: Do not kink the connecting cable or route it over sharp edges. 2. Remove the rubber profiles. 3. In the holes there are plastic sleeves which are required for fastening. 4. Secure the appliance to the cabinet using 2 screws. 5. Reinsert the rubber profiles. Check the Installation 9 WARNING Before you plug in an electrical cord or turn on power supply, make sure all controls are in the OFF position. Switch on the circuit breaker. Verify that elements function properly. 8