Bosch HBE5451UC Installation Instructions - Page 5
Before You Begin, Removing Packaging - oven
![]() |
View all Bosch HBE5451UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Before You Begin Tools and Parts Needed ▯ Philips head screwdriver ▯ 1/8" drill bit and drill ▯ Measuring tape Parts Included Built-in oven Power Requirements The outlet must be properly grounded in accordance with all applicable codes. Preparing the units ▯ Safe use of this appliance can only be guaranteed if it has been installed professionally in accordance with these installation instructions. The installer shall be liable for damages incurred as a result of incorrect installation. ▯ Fitted units must be heat-resistant up to 195°F (90°C), and adjacent unit fronts up to 160°F (70°C). ▯ Cut-out work on the units and worktop should be performed before fitting the appliances. Remove any shavings as they may impair the function of the electrical components. Removing Packaging NOTICE: To prevent damage to your floor keep the unit in its packaging base until ready to be placed in the cabinet opening. Do not slide the unit across the flooring. Different models use different packaging materials. Actual brackets may look differently. Bracket remains in packaging base. 1. Cut straps on outside of box. 2. Remove cardboard box. 3. Remove all top and side cardboard and Styrofoam braces. 4. Place oven in front of cabinets where it is to be installed. 5
![](/manual_guide/products/bosch-hbe5451uc-installation-instructions-8c6b0d3/5.png)