Beko BIM24400 User Manual - Page 6

accumulation might damage the bottom of the oven. • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. • Do not use steam cleaners to clean the appliance as this may cause an electric shock. • Placing the wire shelf and tray onto the wire racks properly It is important to place the wire shelf and/or tray onto the rack properly. Slide the wire shelf or tray between 2 rails and make sure that it is balanced before placing food on it (Please see the following figure). • Do not use the product if the front door glass removed or cracked. • Do not use the oven handle to hang towels for drying. Do not hang up towel, gloves, or similar textile products when the grill function is at open door. • Always use heat resistant oven gloves when putting in or removing dishes into/from the hot oven. • Place the baking paper into the cooking pot or on to the oven accessory (tray, wire grill etc) together with the food and then insert all into the preheated oven. Remove the excess parts of the baking paper overflowing from the accessory or the pot in order to prevent the risk of touching the oven's heating elements. Never use the baking paper in an operating temperature higher than the indicated value for the baking paper. Do not place the baking paper directly on the base of the oven. • Ensure that the appliance is disconnected from mains before replacing the lamp to avoid the possibility of electric shock. Prevention against possible fire risk! • Ensure all electrical connections are secure and tight to prevent risk of arcing. • Do not use damaged cables or extension cables. • Ensure liquid or moisture is not accessible to the electrical connection point. 6/EN